Save $10 off $199 | $25 off $499 | $50 off $999 using the code SPRINGSAVE at checkout. Excludes orders containing MAP items.
FCP Euro Spring Sale


Is your cooling fan running at full speed constantly? This is a prevalent fault on Mercedes-Benz W204, W207, and W212 models. Typically, this is a "no code fault," meaning that the check engine light isn't illuminated and there are no codes stored in the ECU. On these models, this is often the result of a faulty A/C pressure switch reporting an implausible value or an excessively high value. However, it is possible for you to have a check engine light on with the fault codes B107A15 or P244A00. 


Before jumping into this project, you're going to want to use an OBDII scan tool to verify the value the system is receiving from the sensor. You can find this value in various modules; however, I would recommend reviewing live data in the front SAM (Signal Acquisition Module). Using the scan tool, you can also determine if you have either of those fault codes stored. 

Once you have verified your pressure switch is at fault, you will need to have your A/C system evacuated of refrigerant before you can replace it. It is illegal to vent refrigerant into the atmosphere as it's extremely harmful to the environment. We had our system evacuated at a local shop to demonstrate this procedure.

Mercedes W204 A/C Pressure Switch OBDII Scan


Models Affected:

  • Mercedes C300 2008-2014
  • Mercedes C350 2008-2015
  • Mercedes E350 2010-2016

Tools needed to complete this repair: 

Parts needed to complete this repair: 


Step 1: Lift your car and remove splash shields

The pressure switch is located directly under the A/C condenser so you will want to start the procedure by lifting the vehicle and removing the forward bumper splash shield. This will allow you to access the shield that protects the condenser and the A/C pressure switch. Fold the second splash shield out of the way to gain access to the A/C pressure switch.

Mercedes W204 A/C Pressure Switch Splash Shields


Step 2: Remove old A/C pressure switch and replace

This step is straight forward and just requires you to be careful. A/C lines are typically constructed of aluminum and can break easily, so you want to hold the line while using your 27mm box wrench to remove the sensor.

When reinstalling the new A/C pressure switch, lubricate the O-ring and thread it into the A/C line. Since you're working with aluminum, be sure to use a torque wrench and torque to 17ft-lb.

Mercedes W204 A/C Pressure Switch Location

Mercedes W204 A/C Pressure Switch Removal

Mercedes W204 A/C Pressure Switch New

If you want more Mercedes-Benz content, visit our Mercedes-Benz hub, And if you prefer video content, make sure to visit and subscribe to our YouTube channel

author image
Written by :
Evan Madore

Writer/Editor at FCP Euro and owner of a daily R53 MINI Cooper, a track-built R53 MINI, and a 1997 Dakar Yellow E36 M3 Sedan. ••• Instagram: @evan.madore

More Related Articles

How To Code BMW N54 Injectors With An Autel MX808
5 Tips To Maintain Your Car During Long-Term Storage
FCP Euro Spring Sale
How To Read Your BMW N55 Crankshaft For Bearing Codes
How To Pick The Right Coolant For Your Car 
© FCP Euro 2024. All rights reserved.  
Version: 2dfdad1fd