4 Cylinder Diesel Additive Kit (Step 1) - Liqui Moly LMK0007

At FCP we take preventive maintenance seriously and we believe you should too. We have looked into the most common maintenance items that are missed by owners and created a kit that will help them get the most value out of their vehicles, and above all protect their investment.

This kit was designed for the modern 4 cylinder Diesel engines found in various European vehicles in the US Market.

We paired products that complement each other and work together to create the highest levels of protection for your vehicle.

Included in this kit are:

1 x LM2037 Pro-Line Engine Flush

• The flush gently cleans the insides of the engine and helps with the removal of dirt and sludge that has built up over the years.
• Pour in 1 bottle for every 5 Liters of oil. Run the vehicle at idle for 10-13 minutes. (DO NOT DRIVE VEHICLE!!!) Then proceed with draining the oil, replacing the oil filter and pouring in fresh oil from Liqui Moly.

1 x LM20002 CERA TEC oil additive

• CERA TEC helps protect the engine by coating all the moving parts that come in contact with your oil in a ceramic coating.
• This coating helps level out scoring and wear on items such as (Cams, Cylinder Walls, Rod bearings etc)
• It also helps reduce friction after the engine has been treated. (Coating takes place within 700 miles)
• Add 1 bottle of CERA TEC for every 5 liters of oil. (CERA TEC has a milky color to it and when the engine is cold it may appear as if excess water is in the engine. This is normal)
• CERA TEC is designed to be used every 5th oil change or every 25k miles.

2 x LM2005 Diesel Purge Fuel Additive

• Diesel purge contains a mixture of agents with powerful cleaning properties which will make way for better performance and a smoother idle in your Diesel engine.
• This product is designed to be run directly in line to your injectors past the fuel filter.
• Once finished please replace your fuel filter and add half of 1 bottle to the fuel filter housing and the other half into the fuel tank.

4 x LM2002 Super Diesel Additive

• Super Diesel Additive is designed to keep your diesel fuel system clean and corrosion free.
• Super Diesel Additive also raises the Cetane Number which increases the effectiveness of the Diesel fuel sold in North America. A must for North American diesel cars.
• 1 can of Super Diesel Additive should be used every 1000 miles.

4 x Hose Clamp

• We provide 4 new hose clamps in case the your old hose clamps get damaged when removing feed lines from your diesel filter

Please replace your fuel filter at the same time

This selection of treatments should be used together to ensure your engine enjoys a clean and trouble free life. It is suggested that this kit be purchased every 5th oil change or every 25k miles. This is what is deemed to be the first step in preparing your engine for proper care.

The second step kit is used for every oil change between the 25k interval so for oil change 2, 3, 4, and 5.

The STEP 2 kit can be found HERE

Note: If you are changing oil types/manufacturers we recommend you start with this kit to get a proper baseline. Cleaning the engine and then sealing it with CERA TEC.