Volvo XC40 Engine Parts

Includes 7 quarts of 0W20 Castrol Volvo Specific VCC RBS0-2AE and VCC C6SP specification for 2.0T, OE formulation engine oil, Hengst oil filter, and crush washer.

Iridium

Case of 10

Oil Burn Mitigating. Includes 6 liters of Volvo Specific 0W20 Special Tec V Engine Oil, Hengst oil filter, engine flush, Ceretec oil treatment, and crush washer. 4cyl only.

Includes 6 liters of Volvo Specific 0W20 Motul Engine Oil, Hengst oil filter, and crush washer. 4cyl only.

Includes 6 liters of Volvo Specific 0W20 Special Tec V Engine Oil, Hengst oil filter, and crush washer. 4cyl only.

Includes 6 quarts of 5W30 Castrol Edge A5/B5 full synthetic engine oil, Hengst oil filter, and crush washer.

Includes 6 liters of 0W20 Castrol Advanced Full Synthetic Engine Oil, Hengst oil filter, and crush washer. 4cyl only.

Includes 4 Genuine Volvo ignition coils, a set of Genuine Volvo Iridium spark plugs, and a small tube of dielectric grease for a complete VEP 2.0T ignition tune-up

Comes oil cooler, seals, hardware, and fluids for a complete replacement

Includes everything needed to service your XC40 at Volvo's 60k mile interval, including spark plugs, air filters, and fluids.

Complete with both VVT Solenoids as well as gaskets and hardware.

Used for the initial filling of new turbochargers in order to protect them against dry running (Case of 12).

Contains materials and chemicals to do a thorough intake valve carbon cleaning on VEA family direct injection engines.

Includes 6 liters of 5W30 Special Tec 4200 engine oil, Hengst oil filter, and crush washer.

Includes Pro-Line Engine Flush, CERA TEC Oil Treatment and Fuel System Cleaner.

Contains pistons, head gasket and other consumable seals, along with hardware and fluids required when replacing pistons and head gasket on T5 vehicles with turbocharger.

Contains complete balance shaft assembly, mounting hardware, seals, and a fresh oil change for a complete replacement service

Everything required to install a new oil pan on Gen 2 VEA VEP 4cyl engines, including hardware and sealant

Includes all 4 engine and torque mounts for the Volvo XC40

Complete with both VVT Solenoids as well as gaskets and hardware.

Comes oil cooler, seals, hardware, and fluids for a complete replacement

Includes timing belt, pulleys, hardware, VVT plugs, and the special tool required to do a timing belt service on a 4cyl VEP engine

Exhaust