Volvo Oil Change Kit 0W20 - Liqui Moly 32140029KT4

This kit is for vehicles that have higher than normal oil burning. These engines can burn oil due to the piston ring design not allowing oil to retreat back into the engine after being scraped off the cylinder walls. This happens because the oil scraper ring gets clogged with carbon, pushing the oil into the chamber and burning it off. Doing an oil flush before changing the oil can help remove these deposits, reducing oil burn. Following up with a Ceretec treatment smooths out the cylinder walls allowing a thinner oil coating. These two steps used together have proven to reduce oil consumption in Volvo's direct injection 2.0 engines.

This oil conforms to the demanding Volvo VCC RBS0-2AE and ACEA A5/B5 specification as designated by Volvo for 4cyl Drive-E 2.0T direct injection engines.

Engine longevity & optimal performance

• Use every 30k miles
• This lubricant was developed primarily for use in various Volvo Drive-E 4cyl models.
• 2.0T Engine Oil Capacity is between 5.7-6.2 US Qts.
• Always check the level during and after filling as oil capacity differs from year to year. These models feature an electronic dipstick.
• Use in conjunction with [oil filter cap tool]

Its critical to change your engine oil often to ensure proper lubrication at all times and to avoid sludge build up. The proper service intervals that we and enthusiasts recommend ranges from 5k to 7k miles. Changing your oil yourself will save you money over the dealer or specialist shops while leaving you with the satisfaction of performing your own maintenance and knowing it's done right.

Some fluid highlights of this oil change kit include:

Low-friction motor oil based on fully synthetic technology. The combination of non-conventional base oils and modern additive technology reduces the friction inside the engine to a minimum and ensures maximum engine performance as well as low fuel consumption. Specifically designed for use in modern 4 cylinder Volvo applications.

Properties

• minimizes friction and improves fuel economy
• ensures maximum engine performance
• saves fuel and reduces pollutant emissions
• outstanding engine cleanliness
• excellent resistance to aging
• tested for turbochargers and catalytic converters

Specifications and approvals:

Volvo VCC RBS0-2AE

NOT FOR USE IN 5,6 OR 8 CYLINDER VOLVO ENGINES

1 Liter available here