BMW X6 Tools Parts

Used to remove and replace the valve stem seals without removing the cylinder heads from the engine

Used to remove and replace the valve stem seals on the BMW N63/S63 V8

50mm crowsfoot wrench used for loosening and tightening the drive shaft coupling nut used at the differential pinion

47mm 3 buttress female thread adapter that works in conjunction with CTA 7050 cooling system pressure tester

Thin 16mm/18mm open end wrench that can be used for a variety of automotive work

Specially designed for use on 12mm threaded spark plugs used on many modern direct-injected engines, used in conjunction with feeler gauges for precise gap measurements

For removing and installing output shaft in rear axle final drive

Allows for factory-level diagnostics and programming with BMW ISTA-D and ISTA-P

Positon 17 in the diagram - Diagram may not match your specific vehicle

Used for measuring the torque angle of torque to yield bolts, special tool 009 120

Positon 1 in the diagram - Diagram may not match your specific vehicle

50mm crowsfoot wrench used for loosening and tightening the drive shaft coupling nut used at the differential pinion

Position 2 in the Diagram

Special tool 117 030

Used in conjunction with 83300493337 (00 2 080) to extract transfer case fluid

Used with shop vacuum cleaner to remove walnut shell media from the intake port during carbon cleaning on your N54, N55, S55 engine