VW Control Arm Kit Upgrade - 034Motorsport KIT-01934

Dynamic+ RCO Control Arms & Dynamic+ RCO Ball Joints w/Extended Tie Rods

• Adjusts Camber: -2.3° to -3.7°
• Adjusts Caster: 8.0°

Dynamic+ RCO Control Arm Kit

The 034Motorsport Dynamic+ RCO Control Arms for MQB and MQB Evo Audis and Volkswagens are engineered to significantly improve the handling performance of Mk7/8 Volkswagen Golf/GTI/Golf R and 8V/8V.5/8Y Audi A3/S3/RS3 models. Designed as a true drop-in upgrade for the factory stamped steel control arms, the Dynamic+ RCO Control Arms provide an additional 0.5 degrees of caster and allow for approximately 1.2 degrees of increased negative camber adjustment, while also dropping 1.5lbs per corner due to their forged aluminum construction. Dynamic+ RCO Control Arms utilize 034Motorsport Density Line Bushings to reduce deflection and improve handling precision beyond factory levels.

Dynamic+ RCO Control Arms also add 0.5 degree of additional caster to each of the front wheels to improve high-speed stability and cornering ability. This addition of positive caster increases dynamic negative camber while cornering, maximizing the available grip when turning.

Dynamic+ RCO Control Arms are the ideal solution for enthusiasts in search of enhanced handling performance, confidence-inspiring grip, precise steering response, and maximum stability throughout turns. Equally well-suited for the street and track, Dynamic+ RCO Control Arms deliver a perfect balance of performance, durability, and comfort. Dynamic+ RCO Control Arms were tested extensively on the street and at the track with multiple MQB & MQB-Evo Development Vehicles before release to ensure that they deliver excellent performance and durability.

FEATURES:

• Adjustable Camber range from Stock to an additional -0.5°
• Additional Caster of ~0.5°
• Forged Aluminum for Strength and Lightweight Stock 6lbs 4oz 034 RCO Arms: 4lbs 12oz
• Utilizes Density Bushings to Help Reduce Deflection, Maintaining Proper Alignment Under Load
• Direct Replacement of OE Arms

Dynamic+ RCO Ball Joints

The 034Motorsport Dynamic+ RCO (Roll Camber Optimizer) - Camber & Roll Center Adjusting Ball Joints for MQB & MQB-Evo Audis and Volkswagens are engineered to significantly improve the handling performance for lowered Mk7/8 Volkswagen Golf/GTI/Golf R & 8V/8V.5/8Y Audi A3/S3/RS3 models. Designed as a true drop-in upgrade, the Dynamic+ RCO Ball Joints provide an additional negative 1.2° of camber at each of the front wheels and raise and optimize the roll center by 10mm.

Dynamic+ RCO Ball Joints are the ideal solution for enthusiasts in search of enhanced handling performance, confidence-inspiring grip, precise steering response, and maximum stability throughout turns. Equally well-suited for the street and track, Dynamic+ RCO Ball Joints deliver a perfect balance of performance, durability, and comfort.

DYNAMIC+ RCO BALL JOINTS BENEFITS:

Revamped Suspension Geometry for Performance Driving Adjusts and Optimizes Roll Center by 10mm Adds Approximately 1.2° of Negative Camber at Each Wheel (Compared to Factory Ball Joints) Significantly Enhanced Grip When Cornering Improved Steering Feel & Handling Response

FEATURES:

• Corrosion Resistant Nickel-Zinc Coating
• Direct Bolt-In Fitment
• Requires Alignment After Installation
• NOTE: If You Have a Big Brake Kit, Please Double Check Ball Joint Clearance to Rotor Before Finalizing Installation.
• Compatible with Racingline Stage 3 Big Brake Kit

034Motorsport Extended Tie Rod End Kit

Featuring a heavy-duty forged steel body with an additional 20mm of adjustment length over the factory tie rod ends, the 034Motorsport Extended Tie Rod End Kit for Audi or Volkswagen MQB, and MQB Evo allows you to run Dynamic+ RCO Ball Joints and RCO Control Arms together safely and benefit from the added camber and caster gains! Manufactured utilizing a heavy-duty forged steel body, the Extended Tie Rod End Kit is perfect for both track and street driving.

Due to the amount of negative camber achieved with both Dynamic+ RCO Ball Joints and Control Arms installed, the OE tie rod ends run out of threads for safe engagement with the OE inner tie rod and will not allow for proper installation.

With an extra 20mm of adjustment length on the 034Motorsport Extended Tie Rod End Kit, the Dynamic+ RCO Ball Joints and Control Arms can both be installed together safely, allowing for further handling performance thanks to the added camber and caster. The Extended Tie Rod Kit was tested extensively and developed on 034Motorsport’s MK7 GTI, 8V A3, and MK7.5 Golf Alltrack.

FEATURES:

• Re-Engineered for Performance Driving Suspension Setups
• Adds 20mm of Adjustment Length to the Rod End
• CAN ONLY BE INSTALLED IN CONJUNCTION WITH THESE KITS, INDIVIDUALLY OR TOGETHER (034-401-4013) / (034-401-1068)
• If you do not have either or both of these products installed on your car, the Extended Tie Rod End Kit will not fit on your vehicle.
• Forged Steel Body for High-Strength
• Gloss Black Finish for Corrosion Resistance and Long long-lasting good Looks
• Requires Alignment After Installation