Jaguar Spark Plug Tube Seal - Rein XR847907

Product Information

The valve cover gasket seals the valve cover to the uppermost portion of your engine’s cylinder head and keeps oil and oil vapors from leaking at that connection. It must have some amount of crush or elasticity to fill in gaps between the two surfaces, sealing the connection. Typically on most modern vehicles the valve cover gasket is made from rubber or other elastomer materials. Sometimes this can be just a rubber gasket, and others it may be reinforced with metals or other materials to lend more strength and rigidity to the application.

Older classic European cars may use a cork or similar natural material. Both are sensitive to the installation process and tightening torques, but you must take extra special care with cork gaskets to avoid crushing the gasket and causing a leak.

• Age: As a rubber valve cover gasket ages, it will become hard and brittle, eventually allowing oil to leak at the valve cover and cylinder head junction. Cork and natural materials will begin to break down and allow Oil to pass
• Physical Damage: Typically this is from incorrect installation. Using too much tightening torque on the valve cover gasket bolts or fasteners can cause physical damage to the gasket but overcompressing or crushing it beyond its ability to seal the surface of the valve cover and the cylinder head.
• Chemical Damage: Using incompatible chemical gasket maker or sealing agents can cause reactions and failure of the gasket itself. Sometimes this can be because of the material itself, or the design of the gasket and the way it is intended to be sealed by the manufacturer.
• Obvious Oil leaks: A noticeable engine oil leak is the most common symptom of a bad valve cover gasket. This can appear in several different ways, the most common of which is oil seepage or obvious leaks running down the cylinder head from the valve cover.
• Mysterious Oil Leaks: Because of airflow through the engine bay and the exact conditions under which a valve cover gasket leaks, it is possible to have a “mystery” oil leak where oil residue and moisture gather in an unusual or unlikely spot. If you see this and have no other obvious causes, a quick degrease and careful monitoring could point you in the direction of a bad valve cover gasket
• Air intake leaks/faults: Because the valve cover gasket is a crucial seal for the engine, a completely failed or very bad valve cover gasket leak can result in a check engine light or rough running due to incorrect airflow either getting inside the engine or escaping through the leak.
• Burning oil smell: One of the most common engine oil leaks is from the valve cover gasket, and it is common for oil to leak while the car is sitting. Once you start the engine and begin to drive the car, the oil that has collected on the exhaust manifold will burn off, creating a noticeable oil smell while driving.

About Rein

Founded in 2007, CRP Automotive introduced the Rein Automotive line of OE-quality replacement parts to the aftermarket. And in just two short years, Rein Automotive has become very popular among both warehouse distributors and professional repair technicians. Rein is the German word for “pure”, and has come to be synonymous with quality in the automotive aftermarket. A true dealer alternative.

The Rein brand includes a growing number of “better than OE” parts for selected applications. These parts address known weaknesses and premature failures of factory parts. Many of these replacement and service solutions have been developed with the help of our Innovation Council, a hand-picked group of experienced professional repair technicians and shop owners throughout North America.

All Rein Automotive OE-quality parts are backed by the CRP Automotive standard, and are backed with a ISO 9001:2015 quality management system certification. Each year, CRP Automotive ships thousands of Rein Automotive brand products. And with widespread NAFTA market distribution through strategically placed warehouses in Cranbury, New Jersey and Puebla, Mexico - OE-quality products like Rein Automotive are delivered to customers both faster and more cost-effectively than ever before.

In 2017 Rein partnered with FCP Euro in competing a W204 C300 AER car for the 2017 season. The partnership focused FCP Euro to dive deep into the Rein catalog offering, and hundreds of new products were added and integrated into our catalog. Hundreds of new packages were created not only using the full part pine up of Rein products, but also the entire family of CRP products like Pentosin.

Rein is also an innovative brand, winning numerous trade awards — including multiple new product innovation awards at the annual AAPEX trade show.