Jaguar Supplies and Hardware Parts

Wear Protection - Cera Tec is a high-tech ceramic wear protection product for all motor oils. Quantity of 12 - 300ml Cans

Highly effective detergent additives in Engine Flush cleans interior engine before oil change. Quantity of 12 - 500ml Cans

Rejuvenates dried out, porous, shrunken oil and valve stem seals. Quantity of 12 - 300ml Cans

MoS2-Antifriction for Gears is a stabilized solid lubricant concentrate in mineral oil. Case quantity of 12 - 50g tubes.

Gasoline additive keeps all internal components of the injection system clean. Quantity of 12 - 300ml Cans

Ideal for older engines where valve train "tapping" can be heard. Hard running on the track and temporary oil starvation can cause valve train tapping as well. Case of 12 - 300ml

Breaks down deposits on valves and in the combustion chamber. Case of 12 - 150ml cans.

Forms a friction and wear reducing "Moly" film on all sliding surfaces of the engine. Quantity of 12 - 300ml Cans

Deposits in the radiator/ heating system form a barrier to heat exchange, block thermostatic valves and regulator mechanisms. Case quantity of 12 - 300ml Cans.

Electronic Spray is a fully synthetic contact spray which is compatible with plastics and formulated for use on vehicle electronic and electrical systems. Case of 12 - 200ml

AFD 2018 - the anaerobic surface seal (red) 50ml

Curil T is a non-hardening, temperature-resistant sealing compound, fuel resistant.

Dirko black - the permanently elastic, temperature-resistant sealing compound.

Dirko grey - the permanently-elastic, temperature-resistant sealing compound.

Loctite 574

12V/5W

1 Bulb