I have purchased many parts from FCP Euro and everything has been great, but do not buy this tool! It was extremely difficult to use on my 03 VW Passat and I had better luck using needle nose pliers and vise grips. The part did not fit very well in the caliper piston so it kept slipping making it difficult to simultaneously turn and apply the pressure needed to retract the piston. If possible, buy or rent a higher quality tool, otherwise needle nose pliers and some light pressure with vise grips or a clamp will work much better than this.
Needed for retracting rear brake calipers when replacing brake pads
Used for retracting rear disc brakes by rotating the brake piston back into the bore. Has 5 different pin configurations which will work fit most applications. Used with 3/8" drive tools.
Brake Caliper Retractor Cube - CTA-1455
- CTA Manufacturing
- SKU #:
- Brake Caliper Retractor Tool
- FCP ID:
- Shop With Confidence We respect your privacy; we always keep your information confidential.
Worked on my Audi caliper.