LuK
SKU: LUK-6243584000

BMW Clutch Kit - LuK 6243584000

135i, 335i, 335is, 535i, 550i, 550i xDrive, 650i, Z4



Available
In Stock
Price each: $493.38
Core charges are assigned to parts that have reusable components by manufacturers to encourage the return of the used units. Once you return the old part you will be refunded for your core charge, details regarding the return will be emailed to you once you place the order. Note: The customer is responsible for the cost of return shipping.
QTY
Make sure this fits your car
To ensure fitment and browse only products that fit, please select a vehicle first.

Description

Details

SKU:
LUK-6243584000
FCP Euro ID:
522057
GTIN / UPC:
0670774207365
Made in:
Germany
Quality:
OE

OE Numbers

21207603248, 21207573789

MFG Numbers

6243584000, 03-081

Product Information

240mm clutch set, Contains: (Qty.) (1) Disc, (1) Pressure Plate, (1) Release Bearing, (1) Release Fork Lever (2) Alignment tools. Do not remove the shipping plate before the pressure plate and disc are installed on the flywheel. If the plate is removed prematurely, the clutch will self-adjust and become unusable.

If your BMW's clutch has started to slip it will need to be replaced. Some owners will opt to simply replace the clutch disc but we always find it best to replace the entire clutch kit for the best service life and performance. We also recommend replacing the rear main seal.

FCP also recommends inspecting the flywheel for excessive wear. If the flywheel is worn we recommend replacing it at the same time as the clutch kit. This will ensure a long and reliable service life of your BMW's clutch.

Transmission Clutch Kit

Clutch kits are made up of two main components, the clutch friction disc and the clutch pressure plate. Both of these components transfer torque from the flywheel to the transmission. There are several different types of manual transmission clutches in terms of operation but they all perform the same basic function.

Clutches are a pure wear item. In some cases you may have the option to replace a pressure plate or clutch disc separately but its always best to replace both at the same time along with other component such as the rear main seal, pilot bearing, release bearing, and shifter parts.

Transmission Clutch Kit Failure Symptoms
  • Slipping under acceleration
  • Engine revs freely but the vehicle does not accelerate
  • Difficulty shifting gears
  • Squeaking noises while the clutch pedal is pressed
  • Sticky or spongy clutch pedal feel when the clutch pedal is pressed
  • Burning smell from slipping clutch

About LuK

LuK was founded in Germany in 1965. LuK invented the diaphragm spring clutch and today 1 in 4 cars have a LuK clutch. As a key source for OEM (Original Equipment Manufacturer) automotive clutch, torque converter, hydraulic and transmission systems, LuK is a brand respected for innovation and quality. In fact, LuK recently brought the double-clutch transmission with components for continuously variable transmissions into the auto market.

LuK is part of Schaeffler Technologies, a renowned supplier and industry leader in the manufacturing of OEM and aftermarket automotive parts under the brands INA, FAG and LuK. They are one of the largest German and European industrial companies with family ownership, with 180 locations, presently, in over 50 countries. We offer LuK's full line of OE and OEM components for your European vehicle.

Regardless of whether manual, double clutch, automatic or continuously variable transmission, Schaeffler's LuK product brand offers comprehensive solutions for all technologies and thus also covers up-and-coming drive concepts such as hybrid systems. The portfolio includes all relevant product groups – from flywheels to power transmission, release systems and transmission components.

As a global development partner to the automotive industry, all leading vehicle manufacturers rely on Schaeffler's more than 50 years of expertise in the drive train. ​​​​​ With its LuK products, Schaeffler makes a decisive contribution to ensuring efficient power transmission, increasing driving comfort and simultaneously reducing fuel consumption and emissions. ​​​​​

Fits These Cars

BMW 550i

  • 2007 BMW 550i Transmission Clutch Kit
    Manual RWD Sedan 4.8L V8 N62B48B Gas
    Notes: From 3/2007
  • 2008 BMW 550i Transmission Clutch Kit
    Manual RWD Sedan 4.8L V8 N62B48B Gas
  • 2009 BMW 550i Transmission Clutch Kit
    Manual RWD Sedan 4.8L V8 N62B48B Gas
  • 2010 BMW 550i Transmission Clutch Kit
    Manual RWD Sedan 4.8L V8 N62B48B Gas
  • 2011 BMW 550i Transmission Clutch Kit
    Manual RWD Sedan 4.4L V8 N63B44A Gas
  • 2012 BMW 550i Transmission Clutch Kit
    Manual RWD Sedan 4.4L V8 N63B44A Gas
  • 2013 BMW 550i Transmission Clutch Kit
    Manual RWD Sedan 4.4L V8 N63B44A Gas

BMW 650i

  • 2007 BMW 650i Transmission Clutch Kit
    Manual RWD Convertible 4.8L V8 N62B48B Gas
    Notes: From 3/2007
  • 2007 BMW 650i Transmission Clutch Kit
    Manual RWD Coupe 4.8L V8 N62B48B Gas
    Notes: From 3/2007
  • 2008 BMW 650i Transmission Clutch Kit
    Manual RWD Convertible 4.8L V8 N62B48B Gas
  • 2008 BMW 650i Transmission Clutch Kit
    Manual RWD Coupe 4.8L V8 N62B48B Gas
  • 2009 BMW 650i Transmission Clutch Kit
    Manual RWD Convertible 4.8L V8 N62B48B Gas
  • 2009 BMW 650i Transmission Clutch Kit
    Manual RWD Coupe 4.8L V8 N62B48B Gas
  • 2010 BMW 650i Transmission Clutch Kit
    Manual RWD Convertible 4.8L V8 N62B48B Gas
  • 2010 BMW 650i Transmission Clutch Kit
    Manual RWD Coupe 4.8L V8 N62B48B Gas
  • 2012 BMW 650i Transmission Clutch Kit
    Manual RWD Convertible 4.4L V8 N63B44A Gas
  • 2012 BMW 650i Transmission Clutch Kit
    Manual RWD Coupe 4.4L V8 N63B44A Gas
  • 2013 BMW 650i Transmission Clutch Kit
    Manual RWD Convertible 4.4L V8 N63B44B Gas
  • 2013 BMW 650i Transmission Clutch Kit
    Manual RWD Coupe 4.4L V8 N63B44B Gas
  • 2014 BMW 650i Transmission Clutch Kit
    Manual RWD Convertible 4.4L V8 N63B44B Gas
  • 2014 BMW 650i Transmission Clutch Kit
    Manual RWD Coupe 4.4L V8 N63B44B Gas

BMW 335is

  • 2011 BMW 335is Transmission Clutch Kit
    Manual RWD Convertible 3.0L L6 N54B30A Gas
  • 2011 BMW 335is Transmission Clutch Kit
    Manual RWD Coupe 3.0L L6 N54B30A Gas
  • 2012 BMW 335is Transmission Clutch Kit
    Manual RWD Convertible 3.0L L6 N54B30A Gas
  • 2012 BMW 335is Transmission Clutch Kit
    Manual RWD Coupe 3.0L L6 N54B30A Gas
  • 2013 BMW 335is Transmission Clutch Kit
    Manual RWD Convertible 3.0L L6 N54B30A Gas
  • 2013 BMW 335is Transmission Clutch Kit
    Manual RWD Coupe 3.0L L6 N54B30A Gas

Product Reviews

21 Reviews

4.8
Average rating
Leave a review
Umar Khan
on Fri, Sep 18 at 05:32PM
Started Slipping at 620 ft-lbs
I ran this clutch in my N54 135i for 6 years and roughly 50k miles. The lowest horsepower map this clutch has ever seen was 420whp - 446ft-lbs. I daily drove it like that for 3 years and 25k miles, racing, launching, doing hard brake boost hits. After that we turned the car up some more and added ethanol. It held 550whp for two and a half years. That's 8 track days and one visit to the drag strip where I did 4-5 launches from about 4k RPM on Mickey Thompson ET Street SS. Clutch finally let go once the car went past 600+ ft-lbs. I am more than happy with this purchase and just recently went to a twin disc and recommend this clutch to anyone looking to make around 550ish on a N54. Clutch feels like its stock while still holding power :)
Robbie Mann
on Tue, Apr 07 at 09:05AM
Good for DD under 500whp
I have a 2011 N55 FBO, Pure500 turbo, PI + E85 and a custom tune. Clutch held great for a year with some abuse. Did two burnout’s recently and the clutch is almost toasted. If you’re only DD or canyon carving but no hard launches or burn outs, this may last you longer at a similar power level.
Mike
on Fri, Jun 16 at 07:13PM
LuK 21207603248
Please put in the description what parts inclusive in this kit
Julio
on Fri, Mar 31 at 07:14PM
Fits 335i with Flywheel 8 bolt
Put about 100mi and pulls now
Jose Suarez
on Sat, Jan 07 at 02:29PM
Does Fit 335xi
Works perfectly on my 335XI model
eleazar Martinez
on Tue, Dec 06 at 11:20PM
clutch and flywheel kit
so far it works really good and is grippy I changed flywheel and all bolts and was straight forwards install
Shyzah
on Fri, Nov 25 at 10:48PM
So far so good
Put a bit over 1000 miles on it so far. Car is a 2009 BMW 335i n54. Feels just like the OEM clutch. Nice and smooth.
F32_Sensi
on Fri, Oct 14 at 08:27PM
Perfect
Great on my F32 ..
Karl S.
on Tue, Mar 01 at 02:03PM
clutch kit
great upgrade as an OEM+ to E9x platform
Brandon
on Fri, Jul 16 at 12:31PM
Clutch Kit
Everything fits perfectly and is very straight forward to install. Will def pick this clutch up again unless I up the power past 500+ hp!
Show more reviews (11 more)

Questions & Answers

Ask a question
Question Posted by Alexander
I’ve read a handful of sources that this is a great upgrade for the 435i. Can you please confirm if this clutch fits the 2015 435i? If not, what is needed for direct figment?
Answer (Posted by FCP Euro Products Team)
For a 2015 435i 6-speed manual, BMW lists 21208631999 as the direct-fit clutch kit, not 21207603248. This 21207603248 kit is commonly used as a higher-capacity upgrade, but for direct OE fitment use BMW/LuK 21208631999.
Question Posted by a customer
Does this come with a clutch alignment tool? The description doesnt metion it. But another QandA submission says it did...
Answer (Posted by FCP Euro Products Team)
Yes, it does come with it.
Question Posted by Harrison
Does this Clutch Kit have enough clamping pressure to work with Stage 2 upgrades?
Answer (Posted by FCP Euro Products Team)
These are supposed to be capable of holding ~450-500 ft lb of torque, depending on resulting power level and driving style yes, these should be mostly capable.
Question Posted by Logan
Does it come with everything that’s in the picture?
Answer (Posted by FCP Euro Products Team)
Having this product reshot to update the image with its contents as there is some conflicting information. The kit should include Contains: (Qty.) (1) Disc, (1) Pressure Plate, (1) Release Bearing, (1) Release Fork Lever. But this one now may include the alignment tool as well, we will verify and have the photo updated.
Question Posted by a customer
Yall said it wouldn’t come with a clutch fork or clutch alignment tool. But it did. Yall came in clutch
Answer (Posted by FCP Euro Products Team)
Apologies for the error, I will have the image updated to include the tool.
Question Posted by a customer
What does this all include? Pilot bearing ? Clutch Fork?
Answer (Posted by FCP Euro Products Team)
This kit will include the pilot bearing and throwout bearing, will not have a clutch fork or alignment tool.
Question Posted by Gavin
How many bolts are required for the pressure plate? 335i N54
Answer (Posted by FCP Euro Products Team)
6 bolts of part number 21207548052 would be required.
Question Posted by a customer
does this kit come with the pressure plate hold down bolts?
Answer (Posted by FCP Euro Products Team)
No
Question Posted by a customer
Is this clutch for 8 bolt or 6 bolt crankshaft models?
Answer (Posted by FCP Euro Products Team)
This can be used for either configuration.
Question Posted by Cameron
Will this fit a 14' 435i M?
Answer (Posted by FCP Euro Products Team)
No, this is not compatible.
Show more questions (32 more)

FCP Euro Lifetime Replacement Guarantee

Every auto part you buy from FCP Euro is guaranteed for life, for as long as you own the vehicle. Our Lifetime Replacement Guarantee covers everything we sell, including wear-and-tear items like brake pads, gaskets, brake rotors, filters, and wiper blades!

Review our guarantee for complete details about the program.