Audi Disc Brake Kit - EBC GD1846KT3

Audi Disc Brake Kit - Rear

EBC's GD sport rotors features wide aperture slots for cooling to reduce temperatures preventing brake fade. Dimple drilling avoids stress cracks with Thermic black finish with a sleek look whilst preventing corrosion.

Why The Red Stuff?!

There are TWO reasons our customers love Redstuff:

• First because they are the lowest dust pad we have encountered by reducing dust by 60-90-percent. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in ALL OTHER pads.
• Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up. This material is a Synthetic Fiber based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer; it brakes better and is quieter. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking. It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 meters quicker than OEM pads from 100mph/160kph.

Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50-percent dust reduction. Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.

Applicable PR Code(s):

• B9 A4/A4 Quattro/A4 allroad/A5 Quattro/A5 Sportback (High Output - 45 TFSI) - 1KJ (Unpainted Caliper) - Built to 11/25/2019
• B9 S4/S5/S5 Sportback - 1KK (Black Caliper) / 2EJ (Red Caliper) - Built to 11/25/2019

This Kit Includes:

• EBC Redstuff Disc Brake Pad Set
• EBC GD Sport Disc Brake Rotors
• Bowa Brake Pad Wear Sensor
• Genuine VW/Audi Disc Brake Caliper Bolts
• Genuine VW/Audi Disc Brake Caliper Carrier Bolts
• OE Supplier Disc Brake Rotor Set Screws
• Brake Lubricant

Torque Specifications:

• WHT-010-085 - Disc Brake Caliper Bolt - 35 Nm
• N-910-417-02 - Disc Brake Caliper Carrier Bolt - 100 Nm + 90°
• N-106-483-01 - Disc Brake Rotor Set Screw - 8 Nm

Please Note:

To perform this Rear Brake Service, you will need a scan tool that has the ability to put the rear brake calipers in the service position allowing the piston to retract for brake pad replacement. We strongly recommend reviewing our offerings of scan tools that can perform that service which can be found HERE!