Audi Control Arms and Bushings Parts
- Control Arm Kits
Audi Control Arms and Bushings
Audi is internationally known for manufacturing some of the best luxury vehicles on the market out of their headquarters and operations center, in Germany. There, they have built upon a history of modernization that has elevated the auto industry further. Audi’s four rings symbolize their sophisticated engineering that continues to be pushed today. Their ethos, "Progress through Technology", is the brand’s motto and central philosophy, which has been a part of what has helped them innovate and advance over the years. Their exceptional solutions and creative designs have become sought after and built a following behind the Audi brand name. Your Audi’s control arms are an important piece to your front-end suspension. These control arms help provide security to the upper support on your vehicle’s steering knuckle. They are an aspect of the overall double wishbone strut suspension system. This is not the case for vehicle’s that only use torsion or leaf spring suspensions, which just rely on stretchy metal plates for their suspension. Taking off your Audi’s control arms is usually a requirement in order to fix or upgrade the front suspension. In this process, the first thing you have to do is move our Audi to a place where you have a plenty of space on both sides to work. Your driveway or garage is the most likely a great area for this process. Park your vehicle on an even surface area and pull the emergency brake up to for added support. Turn off your Audi. Next, jack up your Audi on the right side first and slide in the jack stand. All vehicles have jack areas that are provided for jacking your Audi to cut down on any possible harm to the frame. You are now ready to jack the left side in the same way you just did and slide a jack stand in. FCP Euro has a plentiful stock of Audi control arm parts and components, including all of the general parts for your Audi.
Audi Control Arm Parts Online
Take off the lug nuts on your Audi’s the right front wheel with a tire iron and put the lug nuts in an out of the way place. Remove the wheel to see the brake beneath it take off the brake calipers and rotor from the steering knuckle. There will be at least two bolts holding the brake assembly together, maybe more depending on the year and make of your Audi. Replicate this procedure on the left front side of your vehicle. Take off the single bolt holding the control arm to the steering knuckle while supporting the knuckle and allow the knuckle come down slowly when the bolt is out. Take off the three bolts on the other end of the control arm and pull it out from the wheel well. Do the same procedure on the right side of your Audi. FCP Euro's alert and steadfast call center team is on hand and waiting to help out with any support or questions you have. If you are in need of information to help find out which control arm component is suitable for your Audi, FCP has a large anthology for the Audi brand. Check out FCP Euro’s website for all products, as well as our continuously updating inventory. If you have questions, would like to put in a phone order, or just have feedback, do not hesitate to give FCP Euro a call at 1-860-388-9001 to connect with our service friendly team.