BMW Coolant Pipe O-Ring - OE Supplier 11531710055

Product Information

An engine coolant pipe o-ring seals the connection between an engine coolant pipe and other engine parts, such as cooling hoses. These o-rings are used at junctions where metal or plastic coolant pipes meet the engine block or cylinder head, ensuring a tight seal. Coolant pipe o-rings usually have a circular cross-section, designed to fit snugly in a groove between the pipe and the engine or hose connection. Occasionally, some auto manufacturers may also use a square-cut o-rings in some applications.

Coolant pipe O-rings are generally made from heat and chemical-resistant materials like nitrile rubber (NBR), silicone, or Viton, all of which are capable of withstanding high temperatures, pressure, and chemical exposure. Nitrile rubber (NBR) O-rings are typically black and are widely used due to their affordability and general resistance to oil and coolant. Silicone O-rings, on the other hand, are often red or orange and are preferred for high-temperature applications because of their superior heat resistance. Viton O-rings, which are often green or brown, offer excellent resistance to a wide range of chemicals, making them ideal for use with various coolants and extreme environments where both heat and chemical exposure are factors.

When installing a new O-ring, it is crucial to ensure that the mating surfaces are clean and free of debris. Lightly lubricating the O-ring with coolant or a compatible lubricant can help ensure a smooth installation and prevent it from tearing or pinching, which would compromise its sealing ability. Regular checks for signs of wear, such as cracks or flattening, can help identify when replacement is necessary to maintain the integrity of the cooling system.

• Mysterious water leaks: It’s not uncommon for a coolant pipe o-ring to fail on high mileage older cars. If you have a few drips of coolant on the ground when parking and letting the car cool down, inspect the flanges and seals where the various coolant pipes meet the engine.
• Physical Damage or Flattening: Sometimes a perfectly sealed pipe flange will leak when reassembled if the pipe is moved or disturbed. Usually, this is because the o-ring was sticky and damaged when removed or flattened with years of heat and coolant exposure making it difficult to seal.
• Low coolant warning: If enough coolant is leaking from the engine coolant pipe o-ring, then you will get a low coolant warning on the dash. Be sure to top up with the correct coolant to make sure the cooling system stays in working order before the leak is repaired.

About OE Supplier

OE Supplier parts are produced by a manufacturer that meets high quality standards and produces at least one part for a vehicle manufacturer. FCP recommends OE & OEM replacement parts as one of the best options in terms of quality and price. Typically all OE manufacturers adhere to stringent quality control and are known to be exceptional quality. OE Supplier parts will often be packaged in a white box with familiar name brand markings and logos on the part itself.