Volvo Turbocharger - Mitsubishi 36002369

Product Information

Turbochargers are commonly used on many modern cars as they allow smaller displacement engines to make the same power as higher displacement engines. In addition, turbocharged engines tend to be more fuel efficient relative to the power that they output. Turbochargers are relatively simple mechanical devices. They use exhaust gas to pressurize the intake air. With more air volume entering the engine it is possible to add more fuel which in turn allows for more power as well as efficiency.

Turbochargers are generally cooled by engine coolant and lubricated by engine oil. So it's not uncommon to see two feed lines going to the turbocharger and two return lines coming from the turbo. Over time turbochargers like all parts wear out. Smoke coming out of the exhaust can indicate that seals in the turbo have gone bad and oil is entering the exhaust. Really worn turbos also don't build boost effectively. If you suspect your turbocharger is worn or on its way top catastrophic failure it is advised to replace it before further engine damage can occur.

• Oil leaks
• Smoking exhaust
• Low boost pressure
• Limp model
• High oil consumption
• Play in turbine shaft due to worn bearing

About Mitsubishi

Based on technological capabilities that have been developed over the years, Mitsubishi Heavy Industries has been building up its technical experience for more than a century and is a leading company where it concerns knowledge of materials, chemistry, vibrations, thermodynamics, fluid dynamics, thermal conduction, tribology and electro physics. The MHI Research & Development Centers embody the joint development of these overlapping areas of expertise. MHI is currently providing a broad range of products and services to a wide diversity of turbo machinery applications: gas turbines, steam turbines, water jets, compressors and turbochargers.