Volvo Performance Intercooler Piping Kit - do88 Performance TR-850-S-63

These pressure pipes have considerably better airflow than the stock pipes, which has been verified in several tests both in car and on do88's SuperFlow SF-1020 flow bench.

Significant advantages of do88 pressure pipes over OEM pipes include:

• Air flow at 0,15bar/2,18psi pressure drop: 452CFM (342CFM), do88 32% higher! See diagram below!
• The total length of the do88 pipes is 550mm shorter than the OEM pipes which increases the throttle response!
• Designed to handle high pressure and temperatures!
• Works with stock 63mm throttle body.
• *Fits all cars listed in the application guide.

The pressure pipes are manufactured in 2.5” mandrel-bent seamless aluminum pipes. These pipes reverse the flow through the intercooler, the air that goes to the throttle body is taken from the bottom of the intercooler. This makes the total length of the do88 pipes 550mm shorter than the OEM pipes.

Custom made high-quality silicone hoses with 4 layers of polyester/aramid reinforcement. These hoses can handle very high temperatures and pressure!

Always remember that the OEM intercooler pipes and hoses were designed for the power level the car was built for and a power increase or even very hard use of the car in a standard version may cause that the OEM pipes and hoses don’t have the performance you need. So only after engine software tune, do88 pressure pipes will give a performance increase over the OEM pipes!

do88 pressure pipes come with all hardware necessary for installation.

* The air guide to the air filter box will not fit together with these intercooler pipes. It can be fitted if you cut the hose end against the throttle body about 25mm (1 inch). Click here to see how to cut a silicone hose.

Included parts in this kit:

• Two pressure pipes
• Four silicone hoses
• Six T-bolt hose clamps
• Three standard hose clamps