More Watch Porsche Wheel Stud Kit (M14x1.5x78) - Motorsport Hardware 14X15BLKBSNR14KT3
Porsche Wheel Stud Kit (M14x1.5x78) - Motorsport Hardware 14X15BLKBSNR14KT3 Watch
Motorsport Hardware
SKU: KIT-14X15BLKBSNR14KT3

Porsche Wheel Stud Kit (M14x1.5x78) - Motorsport Hardware 14X15BLKBSNR14KT3

R14 Ball Seat lug nuts, Black, Replaces factory lug bolts for easy wheel installation, 78mm bullet nose studs ideal for aftermarket wheels or OE wheels, and for wheel spacers

Save for later
1 Rating
Available
In Stock
Price each: $254.09
Core charges are assigned to parts that have reusable components by manufacturers to encourage the return of the used units. Once you return the old part you will be refunded for your core charge, details regarding the return will be emailed to you once you place the order. Note: The customer is responsible for the cost of return shipping.
QTY
Make sure this fits your car
Validate fitment
To ensure fitment and browse only products that fit, please select a vehicle first.
What does this include?

Description

Details

SKU:
KIT-14X15BLKBSNR14KT3
FCP Euro ID:
Quality:
Performance

OE Numbers

99918200336, 24200

MFG Numbers

14X15-BLK-BSNR14, 14X15BLKBSNR14, 14X15-78MM-BBS, 14X1578MMBBS, 24200

This Kit Includes

Qty Part SKU Brand Price
20 Wheel Lug Nut MSH-14X15BLKBSNR14 $85.00
20 Wheel Lug Stud MSH-14X1578MMBBS $159.80
1 Thread Locker PMX-24200 $9.29

Product Information

This kit replaces the factory wheel bolts with wheel studs and lug nuts. Can be used with wheel spacers and the OEM Porsche wheels or aftermarket wheels made for use with R14 ball seat hardware.

Measure the required bolt length before ordering.

Kit Includes:

  • (20) Black open R14 Ball Seat lug nuts (M14x1.5)
  • (20) 82mm black bullet nose wheel studs (M14x1.5)
  • (1) 6mL Blue threadlocker

Wheel Stud Features and Specs:

  • Bullet Nose Studs are Certified by ISO/TS 16949 and ISO 9001 by TÜV
  • M14x1.5x78
  • 10.9 grade hardness
  • Black zinc finish
  • Allen key insert on nose of stud

Installation Information: These studs have a hex drive on the end. It can be used for installing the stud into the wheel hub but cannot be used for torquing the stud to the hub. Before installing the stud make sure the threads on the wheel hub are clean from debris, rust, or oils. You can use a thread chaser to clean the threads along with brake parts cleaner. Apply a few drops of the included thread locker to the short end of the stud and then thread into the wheel hub. For torquing the stud to the hub we recommend using the double nut method (ideally a flange nut) by jamming the two nuts together snug. Then torque the studs to 25 ft/lbs.

About Motorsport Hardware

Motorsport Hardware, "MH", was founded in 1999 combining its knowledge in Aerospace Forging / Failure Analysis with its love of Motorsport Racing. Integrating aerospace manufacturing best practices and safety standards into its processes. MH is widely known for manufacturing some of the industry's best wheel studs, nuts, spacers, and bolts. Offering a wide variety of vehicle fitments, specializing in BMW, Porsche, Audi/VW, Mercedes, and many others, whether they are daily drivers, weekend warriors, or professional race cars. MH's commitment to continuous improvement drives the innovation, quality, and service they are known for.

Fits These Cars

Fits all Porsches

Product Reviews

1 Review

5.0
Average rating
Leave a review
Jason L
on Fri, May 19 at 10:52AM
So far so good
I purchased these for my 2014 Cayman S which gets dual purpose street/track use so I run separate wheel and tire combos. My car also has PCCB, and I actually swap rotors and pads to use steel rotors for track use to save the wear and tear of the significantly more expensive carbon ceramic rotors. That means lots of on and off with tires, rotors, etc. These studs save significant time vs having to use the wheel alignment pins before screwing in the wheel bolts. Only have a few events on them so far this year, but they seem to be holding up well. Nothing has backed out yet, I haven't experienced any wobbling or any adverse effects from this upgrade. Definitely recommend a stud kit if you are frequently changing/swapping tires.

Questions & Answers

Ask a question
Question Posted by a customer
Hello, Are these studs standard length for the 981 GT4, or provide extra length for future spacer use (ie 5-10mm)? I have seen other "standard studs that are only 64mm Thanks, Nick
Answer (Posted by FCP Euro Products Team)
These can be used with wheel spacers and the OEM Porsche wheels or aftermarket wheels made for use with R14 ball seat hardware.

FCP Euro Lifetime Replacement Guarantee

Every auto part you buy from FCP Euro is guaranteed for life, for as long as you own the vehicle. Our Lifetime Replacement Guarantee covers everything we sell, including wear-and-tear items like brake pads, gaskets, brake rotors, filters, and wiper blades!

Review our guarantee for complete details about the program.