Mercedes Engine Oil Dipstick - CTA Manufacturing 8824

Product Information

An engine oil dipstick is a simple tool used to measure the oil level in an engine, and a metering stick to dip into the oil sump. It is a long, narrow metal or plastic rod that fits into a tube that leads directly to the engine’s oil sump or oil pan. At the end of the dipstick is a marked section, indicating the minimum and maximum oil levels. Many manufacturers include the oil volume distance from min to max in your owner's manual, and it will vary from vehicle to vehicle.

There are three common reasons why you may want to replace a dipstick. Leaky o-rings can cause oil weeping and dripping, causing a mess. The indicator section at the bottom can become obscured, scratched, or damaged resulting in a false reading. Finally, because of the conditions inside the engine bay, the dipstick handle can become brittle and break.

• Oil Leaks: The engine oil dipstick effectively plugs the oil sump from the outside world. If the o-rings or seals are old, flat, or missing, the dipstick tube will leak oil. Leaky o-rings can also cause potential ingress of outside grit or debris which you do not want in your engine.
• Broken dipstick handle: Heat cycling, exposure to chemicals, and age will degrade plastic-handled dipsticks, causing them to break.
• Hard to read indicator: Depending on the manufacturer, the indicator section or measurement area at the bottom of the dipstick can become stained, cracked, or otherwise hard to read. If you can’t easily and quickly identify the oil level from the dipstick, then it should be replaced to avoid a potential failure later on.

About CTA Manufacturing

CTA Manufacturing Corp. started in 1978 with a few specialty tools and a lot of great ideas. After spending over 25 years setting up worldwide distribution for the biggest names in the business, the founders of CTA decided to take some of their own ideas to market. Originally named "Classic American Tools", the company expanded from manufacturing about 20 Specialty Tools to over 1000 tools under the CTA name today. Factories are located worldwide, manufacturing Specialty Tools to meet the demands of today’s technicians.