Porsche Disc Brake Caliper - Dansk 1662000280

Product Information

Brake calipers are controlled by your vehicle's brake hydraulic system. When the pedal is pressed, brake fluid pressure is pushed through the master cylinder to the caliper, which extends the piston and forces the brake pads against the rotors to slow your vehicle down. Brake calipers are a pretty simple mechanical device that usually consists of a caliper housing, caliper piston, and an internal square-cut seal.

Brake calipers are subjected to extreme heat with constant heating and cooling cycles. The most common brake caliper failure that occurs is the failure of the internal square-cut seal. The seal fails due to a corroded piston that can tear the seal preventing the caliper piston from being able to retract after being pushed outward. This results in dragging brakes and uneven pad wear.

The best preventative maintenance you can do for your braking system is to flush it regularly. Brake fluid is hygroscopic which means it absorbs moisture over time. Moisture in the braking system can cause brake lines and seals to corrode internally resulting in premature failures. FCP Euro recommends flushing your vehicle's brake system yearly for regular use with the interval increasing for heavy or high mileage use.

• Caliper piston is seized or will not push back into bore
• Brake fluid leaks from piston boot
• Broken or seized bleeder screw
• Heavily corroded brake caliper piston

About Dansk

Based in Viborg, Denmark, JP Group a/s has been a 100% family-owned company since the founding in 1975. Today JP Group is one of the world’s leading companies on the aftermarket - producing and selling high-quality spare parts and accessories for European and Asian cars to customers all over the world. Our product range covers more than 25,000 item numbers which all follow OE quality standards. Moreover, we are one of the preferred suppliers and manufacturer of exclusive spare parts and accessories for classic cars from VAG and Porsche.

Main focus is always towards future development and to be as close to our customers as possible. We constantly monitor the European vehicle fleet to ensure that our product range match both now and tomorrow.