BMW M Performance Big Brake Kit - Genuine BMW 34112450468

This brake kit from BMW is designed to give your Ultimate Driving Machine the ultimate braking performance. It features several upgrades over your BMW's factory brakes including:

Front:
- Four piston calipers with pads, wear sensors, and hardware
- Dimpled, slotted and vented rotors (370x30mm)
- Rotor shield protection plates

Rear:
- Two piston calipers with pads, wear sensors, and hardware
- Rotor shield protection plates

This kit includes the following parts:
x1 01292230088 - Customer Information M PERFORMANCE
x4 07119904511 - Hex Bolt with washer M6X12-U1
x2 34106797603 - Brake disc, ventilated, w/holes, front 370X30
x4 34106864424 - Torx screw with washer M12X1,5X43 ZNS3
x1 34106855477 - Brake caliper housing, red, left "M PERFORMANCE"
x1 34106855478 - Brake caliper housing, red, right "M PERFORMANCE"
x8 34116868785 - Hex Bolt M6X12-10.9-MK-
x1 34116872081 - Protection plate left
x1 34116872082 - Protection plate right
x1 34116878882 - Repair kit, brake pads asbestos-free
x4 34206850536 - Hex screw with collar M12X1,5X32 ZNS3
x1 34206855483 - Brake caliper housing, red, left "M PERFORMANCE"
x1 34206855484 - Brake caliper housing, red, right "M PERFORMANCE"
x4 34211164044 - Hex Bolt M8
x1 34216792243 - Protection plate left
x1 34216792244 - Protection plate right
x1 34216887576 - Repair kit, brake pads asbestos-free
x1 34356792289 - Brake pad wear sensor, front left
x1 34356792292 - Brake-pad sensor, rear
x1 01292230090 - Installation instructions
x1 01292231936 - TUEV/manufacturer certificate
x1 01292231938 - TUEV/manufacturer certificate

Please note: The rear backing plates are only needed on vehicles that use a smaller rear wheel carrier/wheel bearing 42X75X37mm wheel bearing / 166mm parking brake backing plate). Vehicles that are equipped with the larger rear knuckle/wheel bearing come pre-equipped with the larger backing plate and will not require a swap. After installation of this kit, the DSC will need to be coded for M Sport Brake (S2NHA) for proper brake bias. This kit does not include rear brake rotors which will need to be ordered separately, p/n 34206797600 345x24mm dimpled and slotted or p/n 34206894382 345x24 blank rotors can be used.