BMW Coil Spring Lowering Kit (E92) - Dinan D100-0497

Performance Spring Set for use with Dinan/Koni Struts and Shocks as well as Dinan® bump stops

Dinan's Performance Spring set for the E92 335i and 335is provides greater control over body roll by virtue of carefully calibrated spring rates. Additionally, Dinan® lowers the vehicle for improved suspension geometry and an even more aggressive stance. The Dinan® springs are CNC wound with high tensile chrome silicon wire and shot peened for stress relief to last the life of the car. The increase in stiffness of the springs will reduce the rear suspension compression under acceleration and front suspension compression (or dive) under braking, giving your car a more controlled feel. The Dinan performance springs will also provide a noticeable improvement in grip, for high speed driving situations that will inspire confidence in your car's capabilities. The reduced body roll makes the steering more responsive to driver input and will be noticed at low speeds up to the top speed of the vehicle.

Benefits of the Dinan® Performance Spring Set for the E92 335i & 335is:

• Increased spring rates
• Vehicle lowered 1/2" in front and 0" in the rear
• Spring set can be used with camber plates but front will be 1/4" higher than without camber plates
• Preset to prevent spring sag

NOTICE: Dinan Performance Spring sets should be purchased and installed with the corresponding Ride Quality and Handling Kit to achieve the advertised ride height, performance, and ride quality. While not explicitly required, if the matching component is not purchased and installed you will get less than favorable results in the form of poor ride quality and improper handling traits. While we will maintain a full warranty on product defects, any claims against the car’s improper handling/ride quality traits due to not purchasing the corresponding handling kit will not be warranted.