Audi VW Control Arm Set Front Lower Front (A6 S4 Passat) - FCP 4B3407151CX2

Note: It's recommended to use a flange nut on the ball joint side while securing to steering knuckle.

Suspension Control Arm and Ball Joint Assembly - Front Lower Front (x2)

Enhance Ride Control

Control arms are an essential part of your Audi's suspension. It's the most commonly replaced item due to worn out bushings, these arms are the lower component that connects the steering knuckle, ball joint, and strut's to the vehicle's frame and/or body. Without a sturdy set of control arms there is a good chance your vehicle will wander all over the road.

Common Failure Symptoms:

  • Noise from front end over bumps
  • Abnormal tire wear
  • Vehicle wandering while driving
  • Poor Steering response
  • Poor Handling
  • Harsh ride
  • Clunking noise over bumps

How to Replace your Audi Lower Control Arms (Video)

We're here with Mike from M&M Motors in Clinton, CT to show you how to replace the lower control arms on an Audi A6. Don't hesitate to give us a call if you have any questions 1-877-634-0063

This Kit Includes:

Part SKU Brand MSRP
2x Suspension Control Arm and Ball Joint Assembly DEL-TC1343 Fcp logoFCP $48.99
MSRP (bought separately): $97.98
Our kit price: $80.99
You save: $16.99

Fits These Cars:

1999 Audi A6 Quattro Suspension Control Arm and Ball Joint Assembly
Position: Front Lower Front
1999-2001 V8; w/ Steel Subframe
2002 V6; w/ 16" Wheels; From 9/01; VIN 4B.2.031501
2002 V6; w/ 17/18" Wheels
2000 Audi A6 Quattro Suspension Control Arm and Ball Joint Assembly
Position: Front Lower Front
1999-2001 V8; w/ Steel Subframe
2002 V6; w/ 16" Wheels; From 9/01; VIN 4B.2.031501
2002 V6; w/ 17/18" Wheels
2001 Audi A6 Quattro Suspension Control Arm and Ball Joint Assembly
Position: Front Lower Front
1999-2001 V8; w/ Steel Subframe
2002 V6; w/ 16" Wheels; From 9/01; VIN 4B.2.031501
2002 V6; w/ 17/18" Wheels
2002 Audi A6 Quattro Suspension Control Arm and Ball Joint Assembly
Position: Front Lower Front
1999-2001 V8; w/ Steel Subframe
2002 V6; w/ 16" Wheels; From 9/01; VIN 4B.2.031501
2002 V6; w/ 17/18" Wheels
2003 Audi A6 Quattro Suspension Control Arm and Ball Joint Assembly
Position: Front Lower Front
1999-2001 V8; w/ Steel Subframe
2002 V6; w/ 16" Wheels; From 9/01; VIN 4B.2.031501
2002 V6; w/ 17/18" Wheels
2004 Audi A6 Quattro Suspension Control Arm and Ball Joint Assembly
Position: Front Lower Front
1999-2001 V8; w/ Steel Subframe
2002 V6; w/ 16" Wheels; From 9/01; VIN 4B.2.031501
2002 V6; w/ 17/18" Wheels
2000 Audi A8 Quattro Suspension Control Arm and Ball Joint Assembly
Engine base: 4.2L V8, Position: Front Lower Front
2001 Audi A8 Quattro Suspension Control Arm and Ball Joint Assembly
Engine base: 4.2L V8, Position: Front Lower Front
2002 Audi A8 Quattro Suspension Control Arm and Ball Joint Assembly
Engine base: 4.2L V8, Position: Front Lower Front
2003 Audi A8 Quattro Suspension Control Arm and Ball Joint Assembly
Engine base: 4.2L V8, Position: Front Lower Front
2000 Audi S4 Suspension Control Arm and Ball Joint Assembly
Engine base: 2.7L V6, Position: Front Lower Front
Thru 11/99; VIN 8D.Y.080000
2001 Audi S8 Suspension Control Arm and Ball Joint Assembly
Engine base: 4.2L V8, Position: Front Lower Front
2002 Audi S8 Suspension Control Arm and Ball Joint Assembly
Engine base: 4.2L V8, Position: Front Lower Front
2003 Audi S8 Suspension Control Arm and Ball Joint Assembly
Engine base: 4.2L V8, Position: Front Lower Front
2002 Audi A6 Suspension Control Arm and Ball Joint Assembly
Engine base: 3.0L V6, Position: Front Lower Front
2002 w/ 16" Wheels; From 9/01; VIN 4B.2.031501
2002 w/ 17/18" Wheels
2003 Audi A6 Suspension Control Arm and Ball Joint Assembly
Engine base: 3.0L V6, Position: Front Lower Front
2002 w/ 16" Wheels; From 9/01; VIN 4B.2.031501
2002 w/ 17/18" Wheels
2004 Audi A6 Suspension Control Arm and Ball Joint Assembly
Engine base: 3.0L V6, Position: Front Lower Front
2002 w/ 16" Wheels; From 9/01; VIN 4B.2.031501
2002 w/ 17/18" Wheels
2003 Volkswagen Passat Suspension Control Arm and Ball Joint Assembly
Position: Front Lower Front
Exc. W8; From 6/02; VIN 3B.3.072001
W8; From 5/03; VIN 3B.3.450001
2004 Volkswagen Passat Suspension Control Arm and Ball Joint Assembly
Position: Front Lower Front
Exc. W8; From 6/02; VIN 3B.3.072001
W8; From 5/03; VIN 3B.3.450001
2005 Volkswagen Passat Suspension Control Arm and Ball Joint Assembly
Position: Front Lower Front
Exc. W8; From 6/02; VIN 3B.3.072001
W8; From 5/03; VIN 3B.3.450001
Product match fitment

Audi VW Control Arm Set Front Lower Front (A6 S4 Passat) - FCP 4B3407151CX2

Brand:
Fcp logoFCP
SKU #:
KIT-4B3407151CX2
Part:
Suspension Control Arm and Ball Joint Assembly
OE Numbers:
4B3407151C, 4B3407151K
FCP ID:
20897
$80.99 MSRP: $89.99
Make sure this part fits.
Select your vehicle
Qty:
Available
Ships within 1 business day
  • Guaranteed to Fit, Guaranteed for Life We guarantee the fit and quality of our parts for life. If it doesn’t meet your expectations send it back for a replacement or refund. Learn more
  • Fitment Verified This product application guide has been tested to ensure it will accurately fit the cars outlined in our fitment guide.
  • Shop With Confidence We respect your privacy; we always keep your information confidential.
  • What If I Need to Return This Item? Not a problem! If you are not happy with your purchase, we will gladly help you exchange or return your items, provided you follow the guidelines outlined in our Returns Policy.
Give Us a Call
(877) 634-0063
Whether you have technical questions for our ASE certified staff or you need help fulfilling an order, we're here to help you.
Email Us Live Chat

Customer Reviews

Write a Review Average rating:
5.0 based on 1 review(s)
By: Andrew Riggs
Sat, Aug 16 at 9:11AM

Fit perfectly, delivered fast, thanks. Note if you have the aluminium wheel bearing housings like me, you need to salvage the bushings from the old arms. The bushings may come out with the arm (requiring careful separation with a ball joint tool) or may stay in the housing (happy days). Note be sure to use a large-diameter washer with the supplied lock nut to distribute the force onto the aluminium housing. It would be great if FCP supplied a new bushing with each arm to avoid the need to split it off the arm if is really stuck to it.

Some of the reviewers above may have been rewarded for their positive & negative reviews. We don't hold anything back.
Keep me posted
Sign up for Special Offers, News, & Promos from FCP.