Audi VW Disc Brake Caliper - ATE 1K0615423J

Product Information

Brake calipers are controlled by your vehicle's brake hydraulic system. When the pedal is pressed, brake fluid pressure is pushed through the master cylinder to the caliper, which extends the piston and forces the brake pads against the rotors to slow your vehicle down. Brake calipers are a pretty simple mechanical device that usually consists of a caliper housing, caliper piston, and an internal square-cut seal.

Brake calipers are subjected to extreme heat with constant heating and cooling cycles. The most common brake caliper failure that occurs is the failure of the internal square-cut seal. The seal fails due to a corroded piston that can tear the seal preventing the caliper piston from being able to retract after being pushed outward. This results in dragging brakes and uneven pad wear.

The best preventative maintenance you can do for your braking system is to flush it regularly. Brake fluid is hygroscopic which means it absorbs moisture over time. Moisture in the braking system can cause brake lines and seals to corrode internally resulting in premature failures. FCP Euro recommends flushing your vehicle's brake system yearly for regular use with the interval increasing for heavy or high mileage use.

• Caliper piston is seized or will not push back into bore
• Brake fluid leaks from piston boot
• Broken or seized bleeder screw
• Heavily corroded brake caliper piston

About ATE

ATE is a division of Continental Automotive Group of Germany with ATE specializing in hydraulic braking solutions for passenger vehicles. ATE is an OEM (Original Equipment Manufacturer) to Volvo, Mercedes, Porsche and many other car brands. With selections including disc brake rotors, brake drums, pads, sensors, and much more, ATE offers quality parts for all aspects of your braking system. ATE is a safe and effective choice for most automobile enthusiasts, as their parts can withstand the rigors associated with every day wear and tear that comes from the daily commute. Continental has a century of experience in the development and production of braking technologies that help to achieve control over the dynamic forces that act on vehicles. As a brake supplier to the world's largest automakers, Continental can effectively leverage its engineering standards to the entire ATE line of brake products. A trusted brand name in Europe for 100 years