Audi Trunk Lid Lift Support - Lesjofors 4D0827551B

Product Information

The trunk lid lift support, also sometimes called a trunk strut or trunk shock, is a gas-charged cylinder that helps support and lift the trunk lid of a vehicle. Some trunk lift supports are also electric or hydraulic depending on the vehicle’s equipment. The trunk lift support assists the opening of the trunk or hatch, making it easier to open and sometimes opening it automatically. When you open the trunk, the lifting rod extends to push the lid open, ensuring it stays in place. Trunk lid supports remove the need to hold the trunk while loading and unloading and prevent it from slamming shut accidentally. Most European vehicles have a pair of supports, but occasionally there is just one. They are usually held onto the body and the trunk via posts and retaining clips, making them an easy DIY for most vehicle owners.

As a vehicle ages and the trunk support goes through hundreds of actuations, trunk lid lift supports will wear out and fail primarily due to the internal seal on the extending rod failing and losing pressure. When that happens, the trunk lid will feel heavier to open and slam shut unexpectedly. When replacing trunk lid supports that use a flat clip and post-mounting design, we recommend wearing some type of mechanic gloves since the retaining clips can be somewhat sharp and move unexpectedly when applying leverage with a screwdriver.

• Internal Leaks: If the gas piston is leaking internally, the trunk lid lift support won’t be able to leverage the trunk open
• Age/Corrosion/Rust: If the trunk lift supports are exposed to the elements or are very old, it could hinder smooth operation, causing dead spots in the operation

About Lesjofors

Lesjöfors Automotive knows springs. With over 150 years of experience in the manufacture of springs, Lesjöfors focuses on all aspects of the design and manufacture process including software to simulate spring behavior. Lesjöfors began life in 1675 as an iron mill, just up the road from today's present day modern factory. In 1849, the company began producing wire and wire rope. Three years later the first coil spring was designed and manufactured. All production and development takes place onsite and in Lesjöfors own, modern, and technologically advanced factories, in Sweden. Lesjöfors coil springs are manufactured from high-quality spring steel and are supplied with a three-year warranty.