Audi Exhaust Resonator - Integrated Engineering IEEXCG2

Integrated Engineering Exhaust Resonator - Delete Pipe Set

SOUND LIKE A PERFORMANCE CAR

It's no secret the 3.0T engine has the makings of a true performance powerhouse, unfortunately from the factory the supercharged engine is muffled and resonated to death. In its stock state, the car is so quiet that it’s possible to forget your driving an S powered chassis altogether. That just won't do, by removing both factory resonators and replacing them with a high-quality tuned 304 65mm stainless pipes; the engine sound comes to life! If you’re a true enthusiast that loves a deep and throaty exhaust note, you will not be disappointed with your new IE 3.0T downpipe system.

3.0T DOWNPIPE FEATURES:

• Deleting two resonators creates a deep and assertive exhaust note
• Horsepower gains of 8-12 HP
• Constructed from 304 stainless steel 2.5 inch (65mm) diameter tubing
• Easy to install - do it at home with minimal tools
• Tig welded, high quality, and long-lasting
• Fully lined flex section - will never collapse and supercharger approved
• Includes all hardware and clamps needed for a hassle-free install

WHAT ARE DOWNPIPES?

Downpipes are a popular and easy mod to install. As a pair, they replace roughly 12 feet of factory tubing and a pair of resonators. This frees up the exhaust system, making the engine sound as it should. On the 3.0T, the downpipes are located after the catalysts and before the center muffler. Due to the copious amount of exhaust on these chassis, refer to the diagram to simplify the system.

QUALITY CONSTRUCTION

304 Stainless steel tubing and tig welding make for a long-lasting and worry-free product. High quality lined flex sections will never come apart internally and clog your exhaust like inferior flex sections. Especially in forced induction (supercharged or turbo), economy flex sections are bound to fail and cause performance issues.

BOLT-ON INSTALLATION

One of the greatest features of IE downpipes is that they are a breeze to install. They can be done with minimal tools in your garage (or driveway) on jack stands. No welder or Sawzall required! It’s sad that we even have to mention this, but it’s a fact that many cheaper products often require modification to be installed. For a hassle-free install, go with IE who stands behind their products.

Installation Documentation:

IEEXCG2

This item does not meet CARB standards for street use in California and cannot be sold or shipped to California residents.
Purchaser is responsible for ensuring compliance with all applicable local, state, and federal laws.