Audi Engine Oil Change Kit - Motul 079198405EKT78

Discover the pinnacle of engine lubrication with Motul’s 8100 X-CLEAN+ 5W-30, a true marvel in synthetic engine oils designed meticulously for the latest generation of diesel and gasoline engines. Crafted with precision and technical finesse, this advanced lubricant stands as a testament to Motul’s unwavering commitment to excellence.

Engineered to excel in a rapidly evolving automotive landscape, 8100 X-CLEAN+ 5W-30 boasts a 100% synthetic composition that harmonizes flawlessly with the most cutting-edge powertrains. Its exceptional formulation aligns seamlessly with Euro 4, 5, and 6 emission regulations, positioning it as the ideal service lubricant for a wide spectrum of vehicles, including BMW, Mercedes, Porsche, VW, Audi, SEAT, and SKODA models. This outstanding lubricant carries the coveted approvals of major OEMs such as BMW LL-04, Mercedes-Benz MB-Approval 229.51, Porsche C30, and VW 504 00 / 507 00, reinforcing its pedigree.

The remarkable “Mid SAPS” formulation of 8100 X-CLEAN+ 5W-30 is distinguished by its reduction of sulfated ash, phosphorus, and sulfur content. This thoughtful design ensures compatibility with vital emissions-control components like catalytic converters (CAT) and Diesel Particulate Filters (DPF), safeguarding both the engine’s performance and the environment. Notably, the lubricant’s premium base oils exhibit a high HTHS viscosity, conferring exceptional stability even under the harshest operating conditions. This inherent resilience extends regenerating cycles, mitigates oil aging, and contributes to reduced fuel consumption—an advantage that resonates with the environmentally conscious consumer.

Motul’s dedication to precision is aptly embodied by 8100 X-CLEAN+ 5W-30, which goes beyond conventional standards to achieve the revered BMW Long Life-04 certification. This acknowledgment ensures its compatibility with BMW, MINI, and ROLLS-ROYCE vehicles, including those equipped with the innovative Valvetronic system. The lubricant’s adaptive drain intervals, in line with manufacturers’ recommendations, mirror Motul’s commitment to practicality and efficiency. However, users are advised to consult their vehicle’s owner manual or handbook before usage to optimize performance.

ACEA Standards:

• ACEA C3

OEM Approvals:

• BMW LL-04, MERCEDES-BENZ MB-APPROVAL 229.51, PORSCHE C30, VW 504 00 507 00

This Kit Includes:

• 9L of Motul 5W-30 8100 X-CLEAN+ Engine Oil (8.3L / 8.8qt Filling Capacity)
• Engine Oil Filter
• Drain Plug Washers (SEE BELOW)

Oil Change Process and Torque Specifications

Drain Plug Opening Sequence:

• Loosen and Remove Oil Drain Plug from Oil Reservoir Line - Replace Seal (N-013-812-8) and Tighten Oil Drain Plug
• Loosen and Remove Oil Drain Plug from Sealing Flange - Replace Seal (N-013-806-3) and Tighten Oil Drain Plug
• Loosen and Remove Oil Drain Plug from Oil Pump (Lower) - Replace Seal (N-013-811-5) and Tighten Oil Drain Plug
• Loosen and Remove Oil Drain Plug from Oil Pump (Side) - Replace Seal (N-013-811-5) and Tighten Oil Drain Plug
• Loosen and Remove Oil Drain Plug from Oil Cooler - Replace Seal (N-013-815-7) and Tighten Oil Drain Plug

Torque Specification(s):

• Oil Reservoir Line Drain Plug - N-106-379-01 - 10 Nm
• Sealing Flange Drain Plug - N-911-194-01 - 12 Nm
• Oil Pump (Lower) Drain Plug - N-016-024-3 - 10 Nm
• Oil Pump (Side) Drain Plug - N-016-024-3 - 10 Nm
• Oil Cooler Drain Plug - N-029-701-4 - 22 Nm
• Oil Filter Housing Cover - 079-115-433-D - 25 Nm

Filling Procedure

• Fill the Oil Reservoir with 7L of Engine Oil.
• Start the engine and let it idle for about 30 seconds.
• Fill an additional 1.3L of Engine Oil in the Oil Reservoir.
• Verify Engine Oil Level via MMI after 2 minutes of idle, verifying Oil Temperature is between 100° to 110° and the vehicle has been turned off for an additional 2 minutes. Ensure the vehicle is on level ground while checking oil levels.