Audi Engine Oil Change Kit - Liqui Moly 079198405EKT76

Beside wide spread use in vehicles from the Audi/VW group it is also suitable for BMW, Mercedes-Benz, Range Rover, and many Diesel applications.

Properties

• Tested for turbochargers and catalytic converters
• Reduces pollutant emissions
• Smooth engine running
• Reduces fuel consumption
• Rapid oil delivery at low temperatures
• Long engine service life
• Excellent wear resistance
• Optimum oil pressure under all operating conditions
• Outstanding engine cleanliness
• High lubrication reliability
• Optimum stability to aging
• High shear stability

Specifications and approvals:

• ACEA C3
• API SN
• BMW Longlife-04
• MB-Approval 229.31
• MB-Freigabe 229.51
• MB-Approval 229.52
• Porsche C30
• VW 504 00
• VW 507 00

LIQUI MOLY also recommends this product for vehicles or assemblies for which the following specifications or original part numbers are required:

• ACEA A3
• ACEA A5
• ACEA B4
• ACEA B5
• ACEA C2
• API CF
• Fiat 9.55535-S1
• Peugeot Citroen (PSA) B71 2290
• VW 500 00
• VW 501 01
• VW 502 00
• VW 503 00
• VW 503 01
• VW 505 00
• VW 505 01
• VW 506 00
• VW 506 01 (With the exception of R5 and V10 TDI engines before 6/2006)

This Kit Includes:

• 9L of Liqui Moly 5W-30 Top Tec 4200 Engine Oil (8.3L / 8.8qt Filling Capacity)
• Engine Oil Filter
• Drain Plug Washers (SEE BELOW)

Oil Change Process and Torque Specifications

Drain Plug Opening Sequence:

• Loosen and Remove Oil Drain Plug from Oil Reservoir Line - Replace Seal (N-013-812-8) and Tighten Oil Drain Plug
• Loosen and Remove Oil Drain Plug from Sealing Flange - Replace Seal (N-013-806-3) and Tighten Oil Drain Plug
• Loosen and Remove Oil Drain Plug from Oil Pump (Lower) - Replace Seal (N-013-811-5) and Tighten Oil Drain Plug
• Loosen and Remove Oil Drain Plug from Oil Pump (Side) - Replace Seal (N-013-811-5) and Tighten Oil Drain Plug
• Loosen and Remove Oil Drain Plug from Oil Cooler - Replace Seal (N-013-815-7) and Tighten Oil Drain Plug

Torque Specification(s):

• Oil Reservoir Line Drain Plug - N-106-379-01 - 10 Nm
• Sealing Flange Drain Plug - N-911-194-01 - 12 Nm
• Oil Pump (Lower) Drain Plug - N-016-024-3 - 10 Nm
• Oil Pump (Side) Drain Plug - N-016-024-3 - 10 Nm
• Oil Cooler Drain Plug - N-029-701-4 - 22 Nm
• Oil Filter Housing Cover - 079-115-433-D - 25 Nm

Filling Procedure

• Fill the Oil Reservoir with 7L of Engine Oil.
• Start the engine and let it idle for about 30 seconds.
• Fill an additional 1.3L of Engine Oil in the Oil Reservoir.
• Verify Engine Oil Level via MMI after 2 minutes of idle, verifying Oil Temperature is between 100° to 110° and the vehicle has been turned off for an additional 2 minutes. Ensure the vehicle is on level ground while checking oil levels.