Audi Crankshaft Seal - Reinz 038103085C
  • Audi Crankshaft Seal - Reinz 038103085C

Part number: REI-813436700 is a new, unused Reinz engine crankshaft seal. This part number is part of your car's timing case. Timing covers and related hardware ensure that your car's timing gear are properly protected from outside elements and that lubrication remains inside the engine. When performing a timing service it is important to replace gaskets and any damaged covers.

For almost a century Reinz has provided gaskets and sealing products for both auto manufacturers and as an aftermarket solution for car enthusiasts. Their full catalog features over 15,000 different products, providing a great selection for excellent value. Way back in 1962 Reinz became the (OEM) original equipment manufacturer for the prestigious Mercedes-Benz and Volkswagen car companies, a strong partnership that still continues to this day. The company continues to innovate and stay well ahead of the curve. For example, Reinz stopped using asbestos in their gaskets 12 years before it was banned in Germany in 1993. Reinz performs because every part they manufacture meets OEM standards – meaning you're getting great value that you can believe in. Many brands and models use sealing solutions from Reinz.

FCP Euro is an online retailer specializing in replacement parts for European cars including Volvo, BMW, Saab, Audi, VW and Mercedes Benz. Since 1986 FCP has been focused on servicing it’s customer, providing the highest quality replacement parts at affordable prices, and making sure that it’s catalog is accurate to ensure that their replacement parts fit and perform exactly as original equipment.

FCP offers free shipping, unlimited returns, and lifetime warranty on all the products sold. If you need technical assistance, FCP has an in-house call center dedicated to answering any questions you may have about your repair or purchase.

Fits These Cars:
1998 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Base
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
1998 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Base
1999 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GL
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
1999 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLS
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
1999 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLX
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
1999 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GL
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
1999 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLS
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
1999 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLX
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
1999 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GL
1999 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLS
1999 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GL
1999 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLS
2000 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GL
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2000 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLS
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2000 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GL
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2000 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLS
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2000 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLX
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2000 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GL
2000 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GL
2000 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: GLS
2000 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLS
2000 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLX
2001 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GL
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2001 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLS
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2001 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Sport
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2001 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GL
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2001 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLS
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2001 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLX
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2001 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Sport
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2001 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: GL
Chassis Range: From 429517, Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2001 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: GLS
Chassis Range: From 429517, Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2001 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: Sport
Chassis Range: From 429517, Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2001 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GL
2001 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GL
2001 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: GL
From chassis # 1C1429517
2001 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: GLS
2001 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLS
2001 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: GLS
From chassis # 1C1429517
2001 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLX
2001 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Sport
2001 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: Sport
From chassis #1C1429517
2001 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Sport
2002 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GL
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2002 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLS
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2002 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Sport
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2002 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GL
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2002 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLS
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2002 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLX
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2002 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Sport
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2002 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Turbo S
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2002 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: GL
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2002 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: GLS
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2002 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: Sport
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2002 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GL
2002 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GL
2002 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: GL
2002 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: GLS
2002 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLS
2002 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: GLS
2002 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLX
2002 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Sport
2002 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: Sport
2002 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Sport
2002 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Turbo S
2003 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GL
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2003 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLS
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2003 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GL
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2003 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLS
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2003 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLX
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2003 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Turbo S
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2003 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: GL
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2003 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: GLS
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2003 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GL
2003 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GL
2003 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: GL
2003 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: GLS
2003 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLS
2003 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: GLS
2003 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLX
2003 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Turbo S
2004 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GL
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2004 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLS
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2004 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLS
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2004 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLX
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2004 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Turbo S
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2004 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: GL
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2004 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: GLS
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2004 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GL
2004 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.9L L4, Engine designation: ALH, Sub model: GL
2004 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLS
2004 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: GLS
2004 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.9L L4, Engine designation: AHA, Sub model: GLS
2004 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLX
2004 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Turbo S
2005 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLS
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2005 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GL
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2005 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLS
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2005 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: GLS TDI
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2005 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLS
2005 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLS
2005 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GL
2005 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: GLS TDI
2005 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLS
2006 Volkswagen Beetle Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: TDI
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2013 Volkswagen Beetle Engine Crankshaft Seal
Fuel type: DIESEL, Position: Front
2014 Volkswagen Beetle Engine Crankshaft Seal
Fuel type: DIESEL, Position: Front
1998 Volkswagen Passat Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLS, Position: Front
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
1998 Volkswagen Passat Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLS
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
1998 Volkswagen Passat Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLS
1999 Volkswagen Passat Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLS, Position: Front
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
1999 Volkswagen Passat Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLX, Position: Front
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
1999 Volkswagen Passat Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLS
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
1999 Volkswagen Passat Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLX
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
1999 Volkswagen Passat Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLS
1999 Volkswagen Passat Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLX
2000 Volkswagen Passat Engine Crankshaft Seal
Aspiration: Turbocharged, Sub model: GLS
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2000 Volkswagen Passat Engine Crankshaft Seal
Aspiration: Turbocharged, Sub model: GLX
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2000 Volkswagen Passat Engine Crankshaft Seal
Aspiration: Turbocharged, Sub model: 4 Motion
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2000 Volkswagen Passat Engine Crankshaft Seal
Engine designation: ATW, Position: Front
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2000 Volkswagen Passat Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLS
2000 Volkswagen Passat Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLX
2001 Volkswagen Passat Engine Crankshaft Seal
Engine designation: ATW, Position: Front
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2001 Volkswagen Passat Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLS
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2001 Volkswagen Passat Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLX
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2001 Volkswagen Passat Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLS
2001 Volkswagen Passat Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLX
2002 Volkswagen Passat Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLS
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2002 Volkswagen Passat Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLX
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2002 Volkswagen Passat Engine Crankshaft Seal
Engine base: 2.8L V6, Sub model: GLS
Chassis Range: From 135001, Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2002 Volkswagen Passat Engine Crankshaft Seal
Engine base: 2.8L V6, Sub model: GLX
Chassis Range: From 135001, Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2002 Volkswagen Passat Engine Crankshaft Seal
Engine base: 2.8L V6, Sub model: GLS 4 Motion
Chassis Range: From 135001, Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2002 Volkswagen Passat Engine Crankshaft Seal
Engine base: 2.8L V6, Sub model: GLX 4 Motion
Chassis Range: From 135001, Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2002 Volkswagen Passat Engine Crankshaft Seal
Engine base: 2.8L V6, Sub model: GLS
From chassis #3B2135001 or #3B2E165001
2002 Volkswagen Passat Engine Crankshaft Seal
Engine base: 2.8L V6, Sub model: GLX
From chassis #3B2135001 or #3B2E165001
2002 Volkswagen Passat Engine Crankshaft Seal
Engine base: 2.8L V6, Sub model: GLS 4 Motion
From chassis #3B2135001 or #3B2E165001
2002 Volkswagen Passat Engine Crankshaft Seal
Engine base: 2.8L V6, Sub model: GLX 4 Motion
From chassis #3B2135001 or #3B2E165001
2002 Volkswagen Passat Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLS
2002 Volkswagen Passat Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLX
2003 Volkswagen Passat Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GL
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2003 Volkswagen Passat Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLS
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2003 Volkswagen Passat Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLX
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2003 Volkswagen Passat Engine Crankshaft Seal
Engine base: 2.8L V6, Sub model: GL
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2003 Volkswagen Passat Engine Crankshaft Seal
Engine base: 2.8L V6, Sub model: GLS
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2003 Volkswagen Passat Engine Crankshaft Seal
Engine base: 2.8L V6, Sub model: GLX
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2003 Volkswagen Passat Engine Crankshaft Seal
Engine base: 2.8L V6, Sub model: GLX 4 Motion
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2003 Volkswagen Passat Engine Crankshaft Seal
Engine base: 2.8L V6, Sub model: GL
2003 Volkswagen Passat Engine Crankshaft Seal
Engine base: 2.8L V6, Sub model: GLS
2003 Volkswagen Passat Engine Crankshaft Seal
Engine base: 2.8L V6, Sub model: GLX
2003 Volkswagen Passat Engine Crankshaft Seal
Engine base: 2.8L V6, Sub model: GLX 4 Motion
2003 Volkswagen Passat Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GL
2003 Volkswagen Passat Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLS
2003 Volkswagen Passat Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLX
2003 Volkswagen Passat Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLS
2003 Volkswagen Passat Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLX
2004 Volkswagen Passat Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GL
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2004 Volkswagen Passat Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLS
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2004 Volkswagen Passat Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLS 4 Motion
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2004 Volkswagen Passat Engine Crankshaft Seal
Engine base: 2.8L V6, Sub model: GL
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2004 Volkswagen Passat Engine Crankshaft Seal
Engine base: 2.8L V6, Sub model: GLS
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2004 Volkswagen Passat Engine Crankshaft Seal
Engine base: 2.8L V6, Sub model: GLX
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2004 Volkswagen Passat Engine Crankshaft Seal
Engine base: 2.8L V6, Sub model: GLX 4 Motion
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2004 Volkswagen Passat Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GL
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2004 Volkswagen Passat Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLS
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2004 Volkswagen Passat Engine Crankshaft Seal
Engine base: 2.8L V6, Sub model: GL
2004 Volkswagen Passat Engine Crankshaft Seal
Engine base: 2.8L V6, Sub model: GLS
2004 Volkswagen Passat Engine Crankshaft Seal
Engine base: 2.8L V6, Sub model: GLX
2004 Volkswagen Passat Engine Crankshaft Seal
Engine base: 2.8L V6, Sub model: GLX 4 Motion
2004 Volkswagen Passat Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GL
2004 Volkswagen Passat Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLS
2004 Volkswagen Passat Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLS 4 Motion
2004 Volkswagen Passat Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GL
2004 Volkswagen Passat Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLS
2004 Volkswagen Passat Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLS
2005 Volkswagen Passat Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GL
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2005 Volkswagen Passat Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLS
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2005 Volkswagen Passat Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLS 4 Motion
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2005 Volkswagen Passat Engine Crankshaft Seal
Engine base: 2.8L V6, Sub model: GLS
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2005 Volkswagen Passat Engine Crankshaft Seal
Engine base: 2.8L V6, Sub model: GLX
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2005 Volkswagen Passat Engine Crankshaft Seal
Engine base: 2.8L V6, Sub model: GLS 4 Motion
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2005 Volkswagen Passat Engine Crankshaft Seal
Engine base: 2.8L V6, Sub model: GLX 4 Motion
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2005 Volkswagen Passat Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLS
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2005 Volkswagen Passat Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GL TDI
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2005 Volkswagen Passat Engine Crankshaft Seal
Engine base: 2.8L V6, Sub model: GLS
2005 Volkswagen Passat Engine Crankshaft Seal
Engine base: 2.8L V6, Sub model: GLX
2005 Volkswagen Passat Engine Crankshaft Seal
Engine base: 2.8L V6, Sub model: GLS 4 Motion
2005 Volkswagen Passat Engine Crankshaft Seal
Engine base: 2.8L V6, Sub model: GLX 4 Motion
2005 Volkswagen Passat Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GL
2005 Volkswagen Passat Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GL TDI
2005 Volkswagen Passat Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLS
2005 Volkswagen Passat Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLS
2006 Volkswagen Passat Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: 2.0T
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2006 Volkswagen Passat Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Value Edition
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2007 Volkswagen Passat Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Value Edition
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2007 Volkswagen Passat Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: 2.0T
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2007 Volkswagen Passat Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Wolfsburg Edition
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2008 Volkswagen Passat Engine Crankshaft Seal
Engine designation: BPY
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2008 Volkswagen Passat Engine Crankshaft Seal
Engine base: 2.0L L4, Engine designation: BPY, Sub model: Komfort
2008 Volkswagen Passat Engine Crankshaft Seal
Engine base: 2.0L L4, Engine designation: BPY, Sub model: Lux
2008 Volkswagen Passat Engine Crankshaft Seal
Engine base: 2.0L L4, Engine designation: BPY, Sub model: Turbo
1999 Audi A4 Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Base
Chassis Range: From 200001, Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
1999 Audi A4 Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Base
From chassis # 8DX20001
2000 Audi A4 Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Base
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2000 Audi A4 Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Base
2001 Audi A4 Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Base
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2001 Audi A4 Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Base
2002 Audi A4 Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Base
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2002 Audi A4 Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Base
2003 Audi A4 Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Base
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2003 Audi A4 Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Cabriolet
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2003 Audi A4 Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Base
2004 Audi A4 Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Base
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2004 Audi A4 Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Cabriolet
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2004 Audi A4 Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Base
2005 Audi A4 Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Cabriolet
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2005 Audi A4 Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Base
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2005 Audi A4 Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Base
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2005 Audi A4 Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Base
2005 Audi A4 Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Base
2006 Audi A4 Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Cabriolet
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2006 Audi A4 Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Base
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2006 Audi A4 Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Base
2007 Audi A4 Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Base
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2007 Audi A4 Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Cabriolet
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2007 Audi A4 Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Base
2007 Audi A4 Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Cabriolet
2008 Audi A4 Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Cabriolet
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2008 Audi A4 Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Base
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2008 Audi A4 Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Cabriolet
2008 Audi A4 Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Base
2009 Audi A4 Engine Crankshaft Seal
Engine designation: BWT
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2009 Audi A4 Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Cabriolet
1999 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Base
Chassis Range: From 200001, Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
1999 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Avant
Chassis Range: From 200001, Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
1999 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Base, Position: Front
Chassis Range: From 200001, Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
1999 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Avant, Position: Front
Chassis Range: From 200001, Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
1999 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Base
From chassis # 8DX200001
1999 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Avant
From chassis # 8DX200001
2000 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Base
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2000 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Avant
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2000 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Base, Position: Front
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2000 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Avant, Position: Front
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2000 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Base
2000 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Avant
2001 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Base
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2001 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Avant
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2001 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Base
2001 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Avant
2002 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Base
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2002 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Avant
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2002 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Base
2002 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Avant
2003 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Base
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2003 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Avant
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2003 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Base
2003 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Avant
2004 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Avant
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2004 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Base
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2004 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Cabriolet
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2004 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Avant
2004 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Base
2005 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Base
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2005 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Avant
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2005 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Base
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2005 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Avant
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2005 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Base
2005 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Avant
2005 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Base
2005 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Avant
2006 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Avant
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2006 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Base
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2006 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Avant
2006 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Base
2007 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Avant
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2007 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Base
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2007 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Cabriolet
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2007 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Avant
2007 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Base
2007 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Cabriolet
2008 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Avant
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2008 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Base
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2008 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Cabriolet
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2008 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Avant
2008 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Base
2008 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Cabriolet
2009 Audi A4 Quattro Engine Crankshaft Seal
Engine designation: BWT
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2009 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Cabriolet
2009 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Avant
2009 Audi A4 Quattro Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Base
1999 Volkswagen Cabrio Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Base
From chassis 1EX813025
1999 Volkswagen Cabrio Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLS
From chassis 1EX813025
2000 Volkswagen Cabrio Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GL
2000 Volkswagen Cabrio Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLS
2001 Volkswagen Cabrio Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GL
2001 Volkswagen Cabrio Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLS
2001 Volkswagen Cabrio Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLX
2002 Volkswagen Cabrio Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GL
2002 Volkswagen Cabrio Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLS
2002 Volkswagen Cabrio Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLX
1999 Volkswagen Golf Engine Crankshaft Seal
Engine designation: AEG
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
1999 Volkswagen Golf Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GL
1999 Volkswagen Golf Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLS
1999 Volkswagen Golf Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GTI
1999 Volkswagen Golf Engine Crankshaft Seal
Engine base: 2.8L V6, Sub model: GTI
2000 Volkswagen Golf Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: GLS
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2000 Volkswagen Golf Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: GL
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2000 Volkswagen Golf Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLS
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2000 Volkswagen Golf Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GTI GLS
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2000 Volkswagen Golf Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLS
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2000 Volkswagen Golf Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GL
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2000 Volkswagen Golf Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GTI GLS
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2000 Volkswagen Golf Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLS
2000 Volkswagen Golf Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GL
2000 Volkswagen Golf Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GTI GLS
2000 Volkswagen Golf Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLS
AWD
2001 Volkswagen Golf Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLS
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2001 Volkswagen Golf Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GTI GLS
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2001 Volkswagen Golf Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GL
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2001 Volkswagen Golf Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLS
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2001 Volkswagen Golf Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: GL
Chassis Range: From 075841, Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2001 Volkswagen Golf Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: GL
German production from chassis # 1J1W3584838
Brazil production from chassis # 1J1005000
2001 Volkswagen Golf Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GL
2001 Volkswagen Golf Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLS
2001 Volkswagen Golf Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: GLS
From chassis 1J1W3584838 for German production
From chassis # 1J1005000 for Brazil production
2001 Volkswagen Golf Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLS
2001 Volkswagen Golf Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GTI GLS
2002 Volkswagen Golf Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GTI 337
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2002 Volkswagen Golf Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GTI 1.8T
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2002 Volkswagen Golf Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GL
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2002 Volkswagen Golf Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLS
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2002 Volkswagen Golf Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: GL
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2002 Volkswagen Golf Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: GLS
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2002 Volkswagen Golf Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: GL
2002 Volkswagen Golf Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GL
2002 Volkswagen Golf Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: GLS
2002 Volkswagen Golf Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLS
2002 Volkswagen Golf Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GTI 1.8T
2002 Volkswagen Golf Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GTI 337
2003 Volkswagen Golf Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GTI 20th Anniversary
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2003 Volkswagen Golf Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GTI 1.8T
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2003 Volkswagen Golf Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GL
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2003 Volkswagen Golf Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLS
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2003 Volkswagen Golf Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: GL
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2003 Volkswagen Golf Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: GLS
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2003 Volkswagen Golf Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: GL
2003 Volkswagen Golf Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GL
2003 Volkswagen Golf Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: GLS
2003 Volkswagen Golf Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLS
2003 Volkswagen Golf Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GTI 1.8T
2003 Volkswagen Golf Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GTI 20th Anniversary
2003 Volkswagen Golf Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GTI 20th Anniversary
2004 Volkswagen Golf Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GTI 1.8T
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2004 Volkswagen Golf Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GL
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2004 Volkswagen Golf Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLS
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2004 Volkswagen Golf Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: GL TDI
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2004 Volkswagen Golf Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: GLS TDI
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2004 Volkswagen Golf Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GL
2004 Volkswagen Golf Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: GL TDI
2004 Volkswagen Golf Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLS
2004 Volkswagen Golf Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: GLS TDI
2004 Volkswagen Golf Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GTI 1.8T
2005 Volkswagen Golf Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GTI 1.8T
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2005 Volkswagen Golf Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GL
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2005 Volkswagen Golf Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLS
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2005 Volkswagen Golf Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: TDI
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2005 Volkswagen Golf Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GL
2005 Volkswagen Golf Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLS
2005 Volkswagen Golf Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GTI 1.8T
2005 Volkswagen Golf Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: TDI
2006 Volkswagen Golf Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GTI 1.8T
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2006 Volkswagen Golf Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GL
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2006 Volkswagen Golf Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLS
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2006 Volkswagen Golf Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: GLS TDI
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2006 Volkswagen Golf Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GL
2006 Volkswagen Golf Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLS
2006 Volkswagen Golf Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: GLS TDI
2006 Volkswagen Golf Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GTI 1.8T
2010 Volkswagen Golf Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: TDI
Production: To 09-27-2009, Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2012 Volkswagen Golf Engine Crankshaft Seal
Fuel type: DIESEL, Position: Front
2013 Volkswagen Golf Engine Crankshaft Seal
Fuel type: DIESEL, Position: Front
2014 Volkswagen Golf Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: TDI, Position: Front
1999 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 2.0L L4, Mfr body code: A4, Sub model: GL
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
1999 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 2.0L L4, Mfr body code: A4, Sub model: GLS
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
1999 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 2.0L L4, Mfr body code: A4, Sub model: Wolfsburg Edition
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
1999 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GL
Mark 4
1999 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLS
Mark 4
2000 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLS
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2000 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GL
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2000 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLS
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2000 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: TDI
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2000 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GL
2000 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLS
2000 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLS
2001 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GL
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2001 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLS
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2001 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: TDI
Chassis Range: From 075841, Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2001 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GL
2001 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLS
2001 Volkswagen Jetta Engine Crankshaft Seal
Body type: Sedan, Engine base: 2.0L L4, Sub model: GLS
2001 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: TDI
From chassis # 9M1075841
2001 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Wolfsburg Edition
2002 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GL
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2002 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLS
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2002 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: TDI
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2002 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLS
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2002 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GL
2002 Volkswagen Jetta Engine Crankshaft Seal
Body type: Sedan, Engine base: 2.0L L4, Sub model: GLS
2002 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: TDI
2003 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GL
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2003 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLS
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2003 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: TDI
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2003 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GL
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2003 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLS
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2003 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Wolfsburg Edition
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2003 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GL
2003 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GL
2003 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLS
2003 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLS
2003 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Wolfsburg Edition
2003 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: TDI
2004 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: TDI
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2004 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GL
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2004 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLS
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2004 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLI
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2004 Volkswagen Jetta Engine Crankshaft Seal
Engine designation: AVH
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2004 Volkswagen Jetta Engine Crankshaft Seal
Engine designation: AZG
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2004 Volkswagen Jetta Engine Crankshaft Seal
Engine designation: BEV
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2004 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GL
2004 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GL
2004 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLS
2004 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLS
2004 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLI
2004 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: TDI
2005 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: GL TDI
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2005 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: GLS TDI
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2005 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: TDI
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2005 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GL
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2005 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLS
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2005 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLI
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2005 Volkswagen Jetta Engine Crankshaft Seal
Engine designation: BEV
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2005 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GL
2005 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GL
2005 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: GL TDI
2005 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: GL TDI
2005 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLI
2005 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: GLS
2005 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLS
2005 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: GLS TDI
2005 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: TDI
2006 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: TDI
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2006 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLI
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2006 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: 2.0T
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2006 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLI
2006 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: 2.0T
2006 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLI
2006 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 1.9L L4, Sub model: TDI
2007 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: 2.0T
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2007 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLI
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2007 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: 2.0T
2007 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLI
2007 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: GLI
2008 Volkswagen Jetta Engine Crankshaft Seal
Engine designation: BPY
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2008 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 2.0L L4, Engine designation: BPY, Sub model: GLI
2008 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 2.0L L4, Engine designation: BPY, Sub model: Wolfsburg Edition
2009 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: TDI
2010 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: TDI
2010 Volkswagen Jetta Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: TDI
2011 Volkswagen Jetta Engine Crankshaft Seal
Cylinder head type: SOHC
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2011 Volkswagen Jetta Engine Crankshaft Seal
Aspiration: Turbocharged
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2012 Volkswagen Jetta Engine Crankshaft Seal
Cylinder head type: SOHC, Position: Front
2012 Volkswagen Jetta Engine Crankshaft Seal
Fuel type: DIESEL, Position: Front
2013 Volkswagen Jetta Engine Crankshaft Seal
Fuel type: DIESEL, Position: Front
2013 Volkswagen Jetta Engine Crankshaft Seal
Cylinder head type: SOHC, Position: Front
2014 Volkswagen Jetta Engine Crankshaft Seal
Fuel type: DIESEL, Position: Front
2014 Volkswagen Jetta Engine Crankshaft Seal
Cylinder head type: SOHC, Position: Front
2000 Audi TT Engine Crankshaft Seal

Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2000 Audi TT Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Base
2001 Audi TT Engine Crankshaft Seal

Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2001 Audi TT Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Base
2002 Audi TT Engine Crankshaft Seal

Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2002 Audi TT Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Base
2003 Audi TT Engine Crankshaft Seal

Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2003 Audi TT Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Base
2004 Audi TT Engine Crankshaft Seal

Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2004 Audi TT Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Base
2005 Audi TT Engine Crankshaft Seal

Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2005 Audi TT Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Base
2006 Audi TT Engine Crankshaft Seal

Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2006 Audi TT Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Base
2008 Audi TT Engine Crankshaft Seal

Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2008 Audi TT Engine Crankshaft Seal
Engine base: 2.0L L4, Engine designation: BPY, Sub model: Base
2009 Audi TT Engine Crankshaft Seal
Engine designation: BPY
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2009 Audi TT Engine Crankshaft Seal
Engine base: 2.0L L4, Engine designation: BPY, Sub model: Base
2000 Audi TT Quattro Engine Crankshaft Seal

Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2000 Audi TT Quattro Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Base
2001 Audi TT Quattro Engine Crankshaft Seal

Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2001 Audi TT Quattro Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Base
2002 Audi TT Quattro Engine Crankshaft Seal

Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2002 Audi TT Quattro Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Base
2002 Audi TT Quattro Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: ALMS Edition
2003 Audi TT Quattro Engine Crankshaft Seal

Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2003 Audi TT Quattro Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Base
2004 Audi TT Quattro Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Base
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2004 Audi TT Quattro Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Base
2005 Audi TT Quattro Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Base
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2005 Audi TT Quattro Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Base
2006 Audi TT Quattro Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Base
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2006 Audi TT Quattro Engine Crankshaft Seal
Engine base: 1.8L L4, Sub model: Base
2009 Audi TT Quattro Engine Crankshaft Seal
Engine designation: CDMA
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2009 Audi TT Quattro Engine Crankshaft Seal
Engine base: 2.0L L4, Engine designation: CDMA, Sub model: Base, Position: Front
2009 Audi TT Quattro Engine Crankshaft Seal
Engine base: 2.0L L4, Engine designation: CDMA, Sub model: S, Position: Front
2010 Audi TT Quattro Engine Crankshaft Seal
Engine designation: CDMA
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2010 Audi TT Quattro Engine Crankshaft Seal
Engine base: 2.0L L4, Engine designation: CDMA, Sub model: Base, Position: Front
2010 Audi TT Quattro Engine Crankshaft Seal
Engine base: 2.0L L4, Engine designation: CDMA, Sub model: S, Position: Front
2011 Audi TT Quattro Engine Crankshaft Seal
Engine designation: CDMA
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2012 Audi TT Quattro Engine Crankshaft Seal
Engine designation: CDMA
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2013 Audi TT Quattro Engine Crankshaft Seal
Engine designation: CDMA, Position: Front
2014 Audi TT Quattro Engine Crankshaft Seal
Engine designation: CDMA, Position: Front
2002 Audi A6 Quattro Engine Crankshaft Seal
Engine base: 2.7L V6, Sub model: Base
Chassis Range: From 040001, Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2002 Audi A6 Quattro Engine Crankshaft Seal
Engine base: 2.7L V6, Sub model: Base
From chassis # 4B2040001
2003 Audi A6 Quattro Engine Crankshaft Seal
Engine base: 2.7L V6, Sub model: Base
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2003 Audi A6 Quattro Engine Crankshaft Seal
Engine base: 2.7L V6, Sub model: Base
2004 Audi A6 Quattro Engine Crankshaft Seal
Engine base: 2.7L V6, Sub model: Base
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2004 Audi A6 Quattro Engine Crankshaft Seal
Engine base: 2.7L V6, Sub model: Base
2002 Audi Allroad Quattro Engine Crankshaft Seal

Chassis Range: From 040001, Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2002 Audi Allroad Quattro Engine Crankshaft Seal
Engine base: 2.7L V6, Sub model: Base
From chassis # 4B2045001
2003 Audi Allroad Quattro Engine Crankshaft Seal
Engine base: 2.7L V6, Sub model: Base
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2003 Audi Allroad Quattro Engine Crankshaft Seal
Engine base: 2.7L V6, Sub model: Base
2004 Audi Allroad Quattro Engine Crankshaft Seal
Engine base: 2.7L V6, Sub model: Base
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2004 Audi Allroad Quattro Engine Crankshaft Seal
Engine base: 2.7L V6, Sub model: Base
2005 Audi Allroad Quattro Engine Crankshaft Seal
Engine base: 2.7L V6, Sub model: Base
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2005 Audi Allroad Quattro Engine Crankshaft Seal
Engine base: 2.7L V6, Sub model: Base
2006 Audi A3 Engine Crankshaft Seal

Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2006 Audi A3 Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Base
2007 Audi A3 Engine Crankshaft Seal

Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2007 Audi A3 Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Base
2008 Audi A3 Engine Crankshaft Seal
Engine designation: BPY
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2008 Audi A3 Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Base
2007 Volkswagen Eos Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Base
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2007 Volkswagen Eos Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: 2.0T
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2007 Volkswagen Eos Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Base
2007 Volkswagen Eos Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: 2.0T
2008 Volkswagen Eos Engine Crankshaft Seal
Aspiration: Turbocharged
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2008 Volkswagen Eos Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Komfort
2008 Volkswagen Eos Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Lux
2008 Volkswagen Eos Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Turbo
2009 Volkswagen Eos Engine Crankshaft Seal
Engine designation: BPY
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2009 Volkswagen Eos Engine Crankshaft Seal
Engine base: 2.0L L4, Engine designation: BPY, Sub model: Komfort
2009 Volkswagen Eos Engine Crankshaft Seal
Engine base: 2.0L L4, Engine designation: BPY, Sub model: Lux
2008 Volkswagen GTI Engine Crankshaft Seal
Engine designation: BPY
Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2008 Volkswagen GTI Engine Crankshaft Seal
Engine base: 2.0L L4, Engine designation: BPY, Sub model: Base
2006 Volkswagen GTI Engine Crankshaft Seal

Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2006 Volkswagen GTI Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Base
2007 Volkswagen GTI Engine Crankshaft Seal

Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after Installation.
2007 Volkswagen GTI Engine Crankshaft Seal
Engine base: 2.0L L4, Sub model: Base
Product match fitment

Audi Crankshaft Seal - Reinz 038103085C

Brand:
Reinz logoReinz
SKU #:

REI-813436700

Part:
Engine Crankshaft Seal
OE Numbers:
81-34367-00, 038103085C
FCP ID:
425299
$3.69 MSRP: $5.99
Make sure this part fits.
Select your vehicle
Qty:
Available
Ships within 1 business day
  • Guaranteed to Fit, Guaranteed for Life We guarantee the fit and quality of our parts for life. If it doesn’t meet your expectations send it back for a replacement or refund. Learn more
  • Fitment Verified This product application guide has been tested to ensure it will accurately fit the cars outlined in our fitment guide.
  • Shop With Confidence We respect your privacy; we always keep your information confidential.
  • What If I Need to Return This Item? Not a problem! If you are not happy with your purchase, we will gladly help you exchange or return your items, provided you follow the guidelines outlined in our Returns Policy.
Give Us a Call
(877) 634-0063
Whether you have technical questions for our ASE certified staff or you need help fulfilling an order, we're here to help you.
Email Us Live Chat

Customer Reviews

Write a Review Average rating:
4.0 based on 1 review(s)
By: Nathan
Sun, Jul 2 at 1:09PM
Ye Ap

Seems to be good quality

Some of the reviewers above may have been rewarded for their positive & negative reviews. We don't hold anything back.
Keep me posted
Sign up for Special Offers, News, & Promos from FCP Euro.