Keith
on Sun, Jun 28 at 09:32AM
Part was exactly as described and a Perfect fit!
Josh
on Tue, Jun 09 at 11:30AM
Easy job, but does require pulling the intake. This brand new starter cost lest than reman units (I never use reman on these), and includes intake manifold gaskets and one-time-use blts (magnesium engine block).
Ramon Delacruz
on Thu, Jun 04 at 10:33AM
2010 328i BMW
triethylborane
on Tue, Jun 02 at 10:42PM
Great kit, BUT has room for improvement
This is a well priced kit that has a Bosch starter, Rein intake manifold gaskets and CRP bolts in Rein packaging. So, all quality items and the Bosch starter isnt that expensive - it doesnt have a core which is fine. The starter cranks great.
BUT, and this is a HUGE BUT!!! GET THE STINKING CRANKCASE OIL SEPARATOR/BREATHER TUBES. HEAD TO SEPARATOR 11157522931 and SEPARATOR TO OIL PAN 11157567802 No joke, you will break one of these or you will never get it to reach the separator as the plastic shrinks with age . . . seriously, dont bother with this unless you buy these two hoses. The kit should have these tubes as an option. This job is annoying enough, pay the extra $ for the tubes and save some brain damage.
Also you are more than likely going to break the pins off the crank position sensor, which is conveniently located under the starter. This is a flimsy connector and the lead is impossible to get off as there is zero slack in the wiring harness. Get a replacement sensor housing 12527507526 three (3x) pins 12527545852 and three (3x) grommets 61138366245 and order a molex crimping tool from wherever. Again, this is an annoying job that will become enraging if you snap this this up and dont have it on hand. Should be offered or at least SUGGESTED with this kit.
Rachal
on Sun, May 31 at 08:13PM
Starter Kit BMW 2011 535i
Starter kit arrived sooner than I expected. My Dad and I got the starter kit installed yesterday and the car runs GREAT! Thank you FCP Euro!!
Jose
on Sun, May 17 at 03:16AM
Perfect kit for a DIY; installed, car turned on. Lifetime warranty unbeatable.
Wayne Salmon
on Tue, Apr 14 at 02:01PM
Worked perfectly OEM quality and fit with replacement single use aluminum bolts the manifold gaskets sealed the deal...FCP Euro rock I’m a recent convert for life
john
on Mon, Mar 09 at 09:43AM
Fixed my problem. Pain in butt to get out the old one but the part has been working great for six months now.
Jared
on Thu, Mar 05 at 07:29AM
I needed the gaskets but not the bolts... My bolts were steel not aluminum and according to the Bentley manual all the turbos have steel bolts and the non-turbos have the aluminum bolts. It's also a good idea to order a throttle body gasket as well. Alot easier to do by just removing the throttle body as well.
Manish M
on Mon, Feb 24 at 04:09PM
Kit has everything you need. Changed mine took me four hours, the long bolt was the hardest thing to get to. X5 starts up perfectly. Good pricing. Thank you guys for putting this kit together.
Show more reviews (33 more)