Samuel Dickinson
on Thu, Apr 14 at 03:35PM
Worked great and am glad i got the longer lasting one.
Samuel Dickinson
on Thu, Apr 14 at 03:35PM
Worked great and am glad i got the longer lasting one.
De
on Wed, Mar 16 at 12:43PM
All in all the kit is good wish it came with throttle body gasket and DME gasket since those are also connected to manifold but still good kit
De
on Wed, Mar 16 at 12:43PM
All in all the kit is good wish it came with throttle body gasket and DME gasket since those are also connected to manifold but still good kit
Petr
on Sat, Jan 22 at 09:31AM
2008 x5 works like charm, kit has everything needed to do the job completely. I do suggest changing pvc breather tube while you have the intake off as they do get brittle.
Patrick Rimke
on Mon, Dec 27 at 09:54AM
right tools 11mm six-point wrench
These starters are a known fault. After getting the intake out of the way, saw that the BMW "specialist" didn't tighten the BIG battery connection (engine replacement)! So I replaced it anyhow, just incase the original went kaput. The long bolt that is by the firewall, you can't get a star socket on it, I used an 11mm six point to loosen and tighten it... needed to use the two wrench extension!
Mike
on Thu, Dec 02 at 03:45PM
It starts up like a charm
Mike
on Thu, Dec 02 at 03:45PM
It starts up like a charm
Steve Marquis
on Sat, Nov 20 at 04:05PM
Replaced the starter mid 2020 with a cheapy from eBay. Car has 193k so wasn't looking for an expensive part, but should have gone with the Bosch brand for this. Lasted maybe 13 months and just out of their warranty. The starter fried when I was trying to start it, so figured I'd better get a better quality from a trustworthy supplier. FCP did the trick. Like the lifetime warranty but hope to never have to use it on the starter!
Did have a weird thing happen within the first week or 2 of the install. On day 3, I started the car and the starter seemed to stay engaged. I shut off the engine and pulled the key from the ignition. Crazy thing is that the starter kept running even though the engine was off and shut down. I raced to find a 10mm wrench to disconnect the battery negative. This shut it down. I tried it again later that day and the same thing happened. It didn't happen again until a couple of weeks later when leaving the office. Again, I pulled the battery negative to shut it down. When I reconnected it and restarted, it was fine. Now been a few months and it hasn't happened again. I've posted it on bimmerfest.com, but this seems to have a been a freak occurrence.
shane
on Tue, Oct 05 at 06:15PM
installed easy works great would recommend to anyone
Show more reviews (73 more)