After replacing the Fuel Pump, do I have to reprogram anything?
Answer(Posted by FCP Euro Products Team)
No programming is required. This is a mechanical pump driven by the engine. Make sure fault codes are cleared and monitor the high pressure fuel sensor data to ensure the system is working within spec.
QuestionPosted by Eric
Does this come with the HPFP O ring to mate to the block?
Answer(Posted by FCP Euro Products Team)
Yes. As noted, includes o-ring p/n 13517571363.
QuestionPosted by a customer
Does this come with the high pressure fuel pump sensor and low?
Answer(Posted by FCP Euro Products Team)
The sensors in question are not located on the fuel pump or sold with the fuel pump. The low pressure sensor is located on the low pressure feed line and the high pressure sensor is located on the fuel rail. The sensors in question if in need or replacement are p/n 13537537319 which is the high pressure sensor on the fuel rail. The low pressure sensor is tricky depending on whether you have the updated feed line or not. If you have the original feed line (13537545725) you will need p/n 13537614317 for the pressure sensor. If you have the updated feed line (p/n 13537622751) you will need p/n 13537622231 for the sensor.
QuestionPosted by a customer
Is this pump a complete bolt on package? No need to change pressure switch or fuel line?Are any seals required?
Answer(Posted by FCP Euro Products Team)
No additional seals are required. The only seal that needs to be replaced, p/n 13517571363, is included with the pump pre-installed.