Question Posted by a customer
I have a 2002 325CI vert. MT. I ordered a radiator from another source but it was too narrow on the bottom so the plastic seal at the bottom (BMW-17111436245) would not fit. The plastic seal is meant to slip / snap into the channel however if it is too narrow the seal will not fit in. Is this a MT vs auto issue? Will this radiator fit my car?
Answer (Posted by FCP Euro Products Team)
This radiator applies to both manual and auto transmissions due to an adjustment valve that either blocks or opens the transmission oil cooler path. This radiator dimensionally correct for the applications listed and has has the mounting points for the lower radiator seal.
Question Posted by a customer
Does this radiator come with the drain plug as well or do you have to purchase it separately
Answer (Posted by FCP Euro Products Team)
It is included with the radiator. It is a Nissens specific part only due to the special design of this radiator that makes it adaptable to a wider range of years/models.
Question Posted by a customer
So if replacing all hoses and pipes for coolant system, along with radiator, we do not need the included o-rings? Assuming this is for a manual transmission.
Answer (Posted by FCP Euro Products Team)
Correct. The included o-rings are for the radiator hose quick disconnect fittings.
Question Posted by a customer
Will this fit a 2002 BMW 330ci M54 automatic transmission?
Answer (Posted by FCP Euro Products Team)
Yes.
Question Posted by Andrew
Do you sell just the radiator drain plug? and also does any other aftermarket drain plug work with this radiator because I tried using the OEM drain plug and it did fit at all.
Answer (Posted by FCP Euro Products Team)
The drain plug for this radiator is proprietary and specific only to this Nissens radiator. Nissens does not offer replacement drain plugs for their radiators at this time.
Question Posted by a customer
I have a 2004 325i Wagon with Engine designation: M56. Will this radiator fit?
Answer (Posted by FCP Euro Products Team)
As noted, this radiator will only fit 325i and 325Ci models with an M54 engine. For the M56 SULEV engine please see p/n 17117513922.
Question Posted by a customer
Are there any fitment issues with a 2003 automatic? Because this shows a "universal fitment" for both manual and auto, I am concerned about reviews on the internet however those issues may have been resolved with an updated part in 2017 timeframe?
Answer (Posted by FCP Euro Products Team)
There have been no reported fitment issues with this radiator on our end. It has an adjustable screw which allows for it to be used for manual and auto transmissions. The issue per Nissens is "over the years we have learned that some consumers along with a few technicians have trouble removing the default valve (manual) and installing the automatic valve." As a whole we have not had this present an issue. Nissens also offers an automatic specific radiator for this as well since this radiator out of the box is set up for manual transmission vehicles.
Question Posted by Lukas
What are the three gaskets included with the radiator for?
Answer (Posted by FCP Euro Products Team)
The two larger o-rings are replacements for the quick disconnect coupling o-rings used on the upper and lower radiator hose. The smaller o-ring is for the automatic transmission heat exchanger. if your vehicle is a manual transmission the smaller o-ring is not required for use.