Taylor T
on Mon, Feb 15 at 10:17PM
Came with new bolts, fits a bit bigger by maybe 1/16th of an inch compared to the stock pump so installing this might seem tricky at first. But fits well and works great! Save yourself some money and install yourself as well, only took me 3 hours, most of it was taking things off to be able to reach the pump itself.
john cline
on Mon, Feb 01 at 11:52AM
best pump on the market get the thermostat too when changing this it will save you time
Sherm
on Wed, Oct 28 at 09:41PM
I should've known when my shop quoted $1200 for the job that it was going to be a painful DIY. Look at all the youtubes you can to see the good and bad videos, and if you have AWD, you'll find that most of the videos are for RWD which is a much easier job. Anyway, this first time took 6 hours. Next time will take 1-2hr. You know how it goes with BMW repairs.
RDG - Chula Vista, CA
on Mon, Oct 12 at 02:45PM
2008 BMW 328i Auto - 4.5 STARS!!!
The product is the same as the BMW OEM without the BMW LOGO. Installation was easy: (1) Bottom Cover (2) Drain the system (3) Remove the radiator fan (4) Hoses connected (might as well replace them!) (5) Thermostat/Housing (6) Water pump. The water pump came in a anti-static bag and it comes with NEW bolts (x3) to replace the old ones. The only thing that prevented this product from getting a 5 Star is the CLEAR LIQUID that sipped through in between the joint/plates closer to the outlet/inlet. The only explanation for this (not confirmed) is that Pierburg tested the waterpump with hot water prior to distribution but not hot enough for the gasket/seal to expand to its fullest and settle. Therefore, on my first start (15-20 minutes), there was a clear liquid that sipped out (should have been blue if it was leaking coolant) and so I wiped it off a few times. After 20 minutes, it stopped sipping clear liquid or any liquid and all was functioning perfectly. I drove the car for over 100 miles now and there is still no leak on the water pump. Yes, I also bought the thermostat w/ housing through FCP. I recommend buying the kit and other hoses all at once as part of preventive maintenance. Great customer service --> but knowing if the clear liquid is a result of the break-in period for the gasket/seal will be valuable to the consumer. Thank you!
DCAY
on Sat, Sep 26 at 10:31AM
OEM, just like the old pump that came off. Works like it is suppose to.
Jose
on Fri, May 22 at 07:17AM
Perfect fit and working great so far.
Jon
on Thu, May 21 at 01:20PM
Is supplied with aluminum bolts!
This pump comes with a new set of aluminum bolts in the box!
Heriberto
on Sat, Nov 02 at 10:16AM
Guarantee
ED
on Sun, Sep 15 at 10:20AM
Perfect fit and working great so far. Customer service person advised me to get the 3 aluminum bolts that must be replaced, however these bolts are included with the pump.
Asanko1
on Fri, Aug 30 at 05:59AM
PIERBURG makes the GINUIN BMW pump
$60 more because of the BMW stamp on it.
PIERBURG faild, but probably because of my recall..
But I installed the GINUIN BMW working good.
Show more reviews (17 more)